Weed Eater EBV VS Service, Storage, After Each USE, HOW to Remove AN Object from the AIR Intake

S ON/OFF Switch -- Ensure switch func- tions properly by moving the switch to the OFF position. Make sure motor stops; then restart motor and continue.

S Inlet Cover -- Discontinue use of unit if inlet cover fails to latch properly or if it is damaged in any way.

AFTER EACH USE

INSPECT AND CLEAN UNIT & LABELS Stop unit and unplug extension cord.

SAfter each use, inspect complete unit

for loose or damaged parts. Clean the unit using a damp cloth.

SWipe off unit with a clean dry cloth.

CLEAN COLLECTION BAG IMPORTANT: THE COLLECTION BAG MUST BE PROPERLY EMPTIED.

DYou must properly empty and maintain the collection bag to avoid deterioration

and obstruction of air flow.

DRemove the collection bag from the unit and empty after each use. Do not store bag without emptying the bag of all con-

tents (grass, leaves, etc.).

DWash the bag once a year. Remove the bag from the blower and turn the bag in- side out. Wash the bag with a water hose. Allow the bag to hang and dry completely before you reuse the bag.

SERVICE

HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE

WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

1.While holding the inlet cover open, remove the vacuum tubes. The inlet cover must be held open through all remaining steps.

2.Carefully reach into the vacuum opening and clear out the air intake area. Clear all debris from impeller.

3.Inspect the impeller for cracks. If cracked or damaged, do not use the unit. Have parts replaced by your au- thorized service dealer. Do not at- tempt to replace them yourself.

STORAGE

WARNING: Perform the following steps after each use:

SStop unit and disconnect from the pow-

er source.

S Allow motor to cool before storing or transporting.

SStore unit with all guards in place. Posi-

tion unit so that any sharp object cannot accidentally cause injury.

S Store unit unplugged, well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at the end of the season or if it will not be used for 30 days or more.

If your blower is to be stored for a period of time:

SStop unit and disconnect from the pow- er source.

SClean the entire unit before lengthy stor-

age.

S Open inlet cover and clean any dirt, grass, or debris that has collected. In- spect the blower and all tubes. Close and make sure the cover is latched.

SClean air vents and air inlet of debris. S Store your unit and extension cord in a well ventilated area and covered, if pos- sible, to prevent dust and dirt accumula- tion. Do not cover with plastic. Plastic cannot breathe and may cause con- densation and eventual rust or corro-

sion.

S Check entire unit for loose screws. Re- place any damaged, worn, or broken parts.

10