Weed Eater EBV VS Collection BAG Assembly, Adjusting the Shoulder Strap on the Collection BAG

Page 6

Upper Vacuum Tube

Vacuum Assist Handle

Hook

Retaining Post

4.To attach the lower vacuum tube to the upper vacuum tube, first align the arrows on the two tubes. Then, press the two tubes together until the lower tube is securely seated in the upper tube (about 3 inches).

Upper Tube Lower Tube

Align arrows on upper and lower tubes

COLLECTION BAG ASSEMBLY

1.Open the zipper on the collection bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube and the hole for the tube release button is on top.

Elbow Tube

Tube

 

Release

 

Button

 

Hole

Zipper

Small

Opening

Opening

 

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Align the grooves on the elbow tube with the grooves on the blower outlet.

5.Push the elbow tube onto the blower outlet until it snaps into place (elbow tube is secured by red tube release button).

ADJUSTING THE SHOULDER STRAP ON THE COLLECTION BAG

1.Carefully loop the shoulder strap through the buckle as shown in the il- lustration below.

Last In

First In

2.Position the unit on your right-hand side, blower outlet and bag pointing toward the rear. Hold the unit in an upright position with the lower vacu- um tube on the ground to support it.

3.Place the shoulder strap over your head and onto your left shoulder.

4.Adjust the strap to allow a free flow of air from the blower. If the collection bag is kinked, the unit will not operate properly.

NOTE: The strap is designed to posi- tion the collection bag on your shoulder without kinks. The strap is not intended to support the weight of the unit.

Shoulder strap on left shoulder

No kinks in bag allows free air flow

HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE

1.Stop unit and unplug the extension cord.

2.Remove the vacuum tubes by insert- ing the tip of a screwdriver into the latch area on the vacuum assist han- dle. Gently tilt handle of screwdriver toward the front of the unit to release the latch while pulling up on the vacu- um assist handle with your other hand.

Latch Area

Vacuum

Assist

Handle

3.Install the inlet restrictor that was re- moved when assembling for vacuum use.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Advertencia English EspañolFrançais AvertissementSafety Rules Operator SafetyElectrical Safety Stop the motor immediately if you are ap- proached Extension cord disconnecting from the unit during operationUNIT/MAINTENANCE Safety Double Insulation ConstructionBlower Safety Vacuum SafetyStandards Blower Assembly AssemblyStandard screwdriver is required for assembly Vacuum AssemblyHOW to Convert Unit from Vacuum USE to Blower USE Collection BAG AssemblyAdjusting the Shoulder Strap on the Collection BAG Stop unit and unplug the extension cordSelect AN Extension Cord Suffix W-A in Canada WUse multiple cords Know Your Electric Blower ON/OFF Switch Tube Release ButtonSwitch Positions Stopping Your Unit Inlet Cover LatchMaintenance Before Each USEStorage ServiceHOW to Remove AN Object from the AIR Intake After Each USETroubleshooting Table Symptom Cause Remedy Weed Eater

545117528, EBV VS specifications

The Weed Eater EBV 545117528 is an essential tool for homeowners and landscapers alike, designed for efficient and effective blowing of leaves and debris. This powerful blower combines advanced technology with user-friendly features, making it a worthy addition to any outdoor equipment lineup.

One of the standout features of the EBV 545117528 is its robust 25cc two-cycle engine. This engine is engineered for exceptional performance, delivering a reliable airflow to make short work of yard clean-up tasks. With a maximum airspeed of up to 150 mph and an airflow rate of 400 cubic feet per minute (CFM), this blower excels in clearing leaves from patios, driveways, and garden beds.

In terms of design, the EBV 545117528 is crafted with the user in mind. Its lightweight construction allows for easy maneuverability, letting users work for extended periods without fatigue. Weighing in at just around 9.5 pounds, it strikes a balance between power and portability, ideal for both residential and commercial applications.

The blower features a comfortable handle that is ergonomically designed, aiding in reducing strain during use. Additionally, the EBV comes with adjustable airspeed settings, allowing users to customize the power output based on the task at hand, whether it's light debris or heavier loads. This versatility makes it a practical choice for various outdoor cleaning projects.

A notable technology incorporated into the EBV 545117528 is its Easy Start system. This innovation simplifies the starting process, often reducing the number of pulls needed to get the engine running, which is particularly beneficial for users who may not be as experienced with gas-powered equipment.

Durability is another key characteristic of the Weed Eater EBV 545117528. Built with high-quality materials, it can withstand regular use and tough outdoor conditions.

In conclusion, the Weed Eater EBV 545117528 is a powerful and lightweight blower, crafted with advanced technologies geared towards efficiency and easy operation. With its impressive performance capabilities and user-friendly features, it serves as an excellent choice for anyone looking to tackle outdoor cleanup with ease and effectiveness.
Top Page Image Contents