Weed Eater WET1742STA To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 20

SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 18

TO CHECK AND ADJUST BRAKE (See Fig. 19)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 19

TO REPLACE MOTION DRIVE BELT (See Fig. 20)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model NO. WET1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Replace Fuse To Replace Headlight BulbInterlocks and Relays To Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control Storage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number WET1742STAElectrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Bolt Hex 7/16-20 x 4 x Gr -1.5 Thr Steering Assembly Nut Hex Jam Toplock 1/2-20 Unf Engine 170551 Control Throt /Ch Flag Seat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck Mandrel Assembly Includes Hous Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

WET1742STA specifications

The Weed Eater WET1742STA is a powerful and efficient string trimmer designed to handle various landscaping tasks with ease. It features a robust 17-inch cutting width that allows users to quickly cut through grass and weeds, making yard work more efficient. This trimmer is equipped with a reliable 2-cycle 17 cc engine, providing sufficient power to tackle dense vegetation without straining.

One of the standout features of the WET1742STA is its Easy Start technology. This user-friendly innovation ensures that starting the trimmer is simple, requiring minimal effort. With just a few pulls, users can expect a smooth ignition, which is especially beneficial for those who may have difficulty starting traditional gas-powered tools. Furthermore, the trimmer's lightweight design contributes to its overall ease of use, allowing for extended periods of operation without excessive fatigue.

The WET1742STA also incorporates the latest automatic feed spool system. This feature eliminates the need for manual line advancement, ensuring a continuous flow of cutting line as it is needed. This not only saves time but also minimizes interruptions during work sessions, allowing users to maintain their momentum while trimming.

In addition to its performance capabilities, this trimmer is designed with user comfort in mind. The ergonomic handle provides a secure grip, reducing vibration and making handling more comfortable during extended use. The adjustable telescoping shaft allows users to customize the length of the trimmer to their height, ensuring optimal control and reducing strain on the back.

Durability is another key aspect of the Weed Eater WET1742STA. Its sturdy construction is designed to withstand the rigors of outdoor use, and the quality materials used in its manufacturing help it last longer than comparable models. This trimmer is also easy to maintain, with accessible components that allow users to perform regular upkeep without hassle.

Overall, the Weed Eater WET1742STA stands out as a reliable and efficient tool for both homeowners and professional landscapers. With its combination of powerful performance, advanced features, and user-friendly design, it ensures that yard maintenance tasks are completed quickly and efficiently. Whether you're tackling overgrown areas or simply maintaining your lawn, this trimmer is equipped to meet your needs with precision and ease.
Top Page Image Contents