OPERATION
TO ADJUST CUTTING HEIGHT
Adjust cutting height to suit your require- ments. Medium position is best for most lawns. Raise wheels for low cut and lower wheels for high cut. All four wheels are adjusted by a single lever.
•Pull adjuster lever toward wheel. To lower mower, move lever forward to desired position. To raise mower, move the lever toward the rear.
Height adjuster lever
LEVER
BACKWARD
TO RAISE
MOWER
LEVER
FORWARD
TO LOWER
MOWER
TO ATTACH GRASS CATCHER
1.Lift the rear door of the lawn mower and place the grass catcher frame side hooks onto the door pivot pins.
2.The grass catcher is secured to the lawn mower housing when the rear door is low-
ered onto the grass catcher frame. 
CAUTION: Do not run your lawn mower
without mulcher plug or approved grass catcher in place. Never attempt to op- erate the lawn mower with the rear door removed or propped open.
Pivot pins | Rear door |
Grass catcher handle
Catcher frame hook
TO EMPTY GRASS CATCHER
1.Lift up on grass catcher using the frame handle.
2.Remove grass catcher with clippings from under lawn mower handle.
3.Empty clippings from bag.
NOTE: Do not drag the bag when emptying. It will cause unnecessary wear.
CAUTION: Under normal usage, the
catcher material is subject to deterioration and wear and should, therefore, be checked frequently for replacement. Any replacement catcher should be checked to ensure compliance with original manufacturer's specifications.
Grass catcher 
frame handle
Bag handle
9