Weed Eater WET1338B Tools Required for Assembly, To Remove Tractor from Carton, Unpack Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(2)

1/2" wrenches

Pliers

(1)

9/16" wrench

Tire pressure gauge

Utility knife

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft. Align mounting holes in extension and lower shafts and install 1/4 hex bolt and locknut. Tighten securely.

IMPORTANT: TIGHTEN BOLT AND NUT SECURELY TO 10-12 FT. LBS TORQUE.

•Place tabs of steering boot over tab slots in dash and push down to secure.

 

INSERT

 

1/2 HEX NUT

 

LARGE FLAT

 

WASHER

STEERING

STEERING

BOOT

WHEEL

 

 

TABS

ADAPTER

 

 

EXTENSION SHAFT

 

1/4 HEX BOLT

1/4 LOCKNUT

 

LOWER

TAB

SLOTS

STEERING

 

SHAFT

 

FIG. 1

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large flat washer, 1/2 hex nut and tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model NO. WET1338B General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills To Transport Check Engine OIL LevelMowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETires TractorBrake Operation Operator Presence SystemBelts BatteryEngine Transaxle CoolingClean AIR Screen Engine Cooling Fins See FigAIR Filter See Fig Spark Plugs CleaningMuffler IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTo Adjust Steering Wheel Align Ment Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Attach Jumper CablesInterlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number WET1338BElectrical KEY Part Description Chassis Repair Parts Drive Transaxle Steering Repair Parts Engine 170864 Control Th/ch Flag Seat Decals Wheels & TiresMower Lift Repair Parts Mower Deck CAB Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWeedeater

WET1338B specifications

The Weed Eater WET1338B is a powerful and efficient string trimmer designed for homeowners and professional landscapers alike. This robust tool is engineered to tackle a variety of cutting tasks, making it a versatile addition to any lawn care arsenal.

One of the standout features of the WET1338B is its 38cc two-cycle engine, which delivers impressive performance and reliability. This engine offers users the power needed to cut through thick grass, weeds, and even light brush without sacrificing efficiency. Its lightweight design ensures that users can maneuver it easily around their yards, reducing fatigue during extended use.

In terms of technology, the Weed Eater WET1338B is equipped with a 17-inch cutting width, allowing for a wide swath of grass to be trimmed with each pass. This feature significantly cuts down on the time needed to complete landscaping tasks. The dual-line trimmer head provides a professional finish while allowing for easy line replacement. The automatic line advancement system ensures that the cutting line is managed effectively, so users can focus on the job without worrying about running out of line mid-task.

Comfort and usability are at the forefront of the WET1338B’s design. The trimmer includes an adjustable handle that provides optimal control and comfort. The cushioned grip reduces vibrations during use, enhancing the overall user experience. The lightweight build of the trimmer also minimizes strain, making it suitable for users of varying physical abilities.

Moreover, the WET1338B is crafted with durability in mind. Its rugged construction is designed to withstand the rigors of regular use, ensuring that it remains a reliable tool for years to come. The fuel-efficient engine allows users to work longer without frequent refueling, adding to its practicality.

Safety features are also an essential aspect of the Weed Eater WET1338B. The inclusion of a protective guard enhances user safety, preventing debris from being thrown towards the operator during use.

Overall, the Weed Eater WET1338B stands out as a feature-rich, user-friendly string trimmer that effectively meets the demands of lawn care professionals and enthusiastic homeowners. Its combination of power, durability, and ease of use makes it a valuable investment for anyone looking to maintain their outdoor space with minimal effort.
Top Page Image Contents