Service, Storage, After Each USE | Weed Eater 545186750 guide

CHECK FOR DAMAGED OR WORN PARTS

Contact your authorized service dealer for replacement of damaged or worn parts.

SON/OFF Switch -- Ensure switch functions

properly by moving the switch to the OFF position. Make sure motor stops; then re- start motor and continue.

SInlet Cover -- Discontinue use of unit if in- let cover fails to latch properly or if it is damaged in any way.

AFTER EACH USE

INSPECT AND CLEAN UNIT & LABELS

Stop unit and unplug extension cord.

S After each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth.

SWipe off unit with a clean dry cloth.

CLEAN COLLECTION BAG IMPORTANT: THE COLLECTION BAG

MUST BE PROPERLY EMPTIED.

D You must properly empty and maintain the collection bag to avoid deterioration and obstruction of air flow.

DRemove the collection bag from the unit and empty after each use. Do not store bag without emptying the bag of all con- tents (grass, leaves, etc.).

DWash the bag once a year. Remove the bag from the blower and turn the bag in- side out. Wash the bag with a water hose. Allow the bag to hang and dry completely before you reuse the bag.

SERVICE

HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE

WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

1.While holding the inlet cover open, remove the vacuum tubes. The inlet cover must be held open through all remaining steps.

2.Carefully reach into the vacuum opening and clear out the air intake area. Clear all debris from impeller.

3.Inspect the impeller for cracks. If cracked or damaged, do not use the unit. Have parts replaced by your au- thorized service dealer. Do not at- tempt to replace them yourself.

STORAGE

WARNING: Perform the following steps after each use:

SStop unit and disconnect from the power source.

S Allow motor to cool before storing or transporting.

SStore unit with all guards in place. Posi- tion unit so that any sharp object cannot accidentally cause injury.

S Store unit unplugged, well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at the end of the season or if it will not be used for 30 days or more.

If your blower is to be stored for a period of time:

SStop unit and disconnect from the power source.

SClean the entire unit before lengthy stor- age.

S Open inlet cover and clean any dirt, grass, or debris that has collected. In- spect the blower and all tubes. Close and make sure the cover is latched.

SClean air vents and air inlet of debris.

S Store your unit and extension cord in a well ventilated area and covered, if pos- sible, to prevent dust and dirt accumula- tion. Do not cover with plastic. Plastic can- not breathe and may cause condensation and eventual rust or corrosion.

S Check entire unit for loose screws. Re- place any damaged, worn, or broken parts.

545186750 specifications

The Weed Eater 545186750 is a powerful and efficient tool designed for homeowners and landscaping professionals alike. This versatile trimmer offers a combination of features that ensure a clean and precise cut, making it an essential addition to any outdoor maintenance arsenal.

One of the standout characteristics of the Weed Eater 545186750 is its 25cc two-cycle engine. This engine provides ample power to tackle tough weeds, grass, and overgrowth with ease. The lightweight design of the trimmer allows for easy maneuverability, enabling users to work in tight spaces or navigate around flower beds and garden edges without difficulty.

Equipped with a durable dual-line cutting system, the Weed Eater 545186750 ensures efficiency and effectiveness during operation. The trimmer uses a 0.095-inch line, which is ideal for cutting through thick vegetation, while the automatic bump feed system allows users to easily advance the line as needed, eliminating downtime and enhancing productivity.

The design of the Weed Eater 545186750 incorporates a straight shaft, which provides better reach and access to hard-to-reach areas. This feature is particularly beneficial for those tackling tall grass or weeds in challenging locations. Additionally, the trimmer comes equipped with a comfort grip handle, reducing fatigue during extended use and ensuring a more enjoyable experience.

Safety is also a key focus in the design of the Weed Eater 545186750. It features an integrated safety guard that protects the user from debris while cutting. Furthermore, the trimmer’s lightweight nature and balanced design contribute to its ease of use, making it suitable for users of all experience levels.

The user-friendly start system is another important aspect of the Weed Eater 545186750. With an easy-start technology, users can expect reliable starts with minimal effort, allowing them to get to work without frustration.

In summary, the Weed Eater 545186750 is a dependable and effective string trimmer that combines power, comfort, and ease of use. Its advanced features and thoughtful design make it a great choice for anyone looking to maintain a tidy yard or tackle landscaping projects. With its performance and efficiency, this trimmer is sure to meet the needs of a variety of users, from casual gardeners to professional landscapers.