Weed Eater 530087893 Know Your Unit, Plan Ahead, Handle Fuel with CAUTION, IT is Highly Flammable

Page 2

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

SRead your Operator’s Manual carefully until you completely understand and can follow all warnings and safety rules before operat-

ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual.

PLAN AHEAD

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent rocks or debris from being blown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec- tion should meet the requirements of ANSI

Z87.1

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when

working with unit in dusty environments.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or cloth- ing with loosely hanging straps, ties, tas- sels, etc. They can be caught in moving

parts.

DDo not operate unit when you are tired, ill, up- set, or if you are under the influence of alco-

hol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit. Do not point blower nozzle in the direction of people or pets.

D Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or dam- age during operation.

HANDLE FUEL WITH CAUTION, IT IS HIGHLY FLAMMABLE

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is

mixed, poured, or stored.

D Mix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel pur- poses.

D Do not smoke while handling fuel or while operating the unit.

D Make sure the unit is properly assembled and in good operating condition.

DDo not fill fuel tank while engine is running. D Avoid spilling fuel or oil. Wipe up fuel spills be-

fore starting engine.

D Move at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

D Never start or run engine inside a closed room, building or other unventilated area. Breathing exhaust fumes can kill.

D To avoid static electricity shock, do not wear rubber gloves or any other insulated gloves while operating unit.

D Do not set unit on any surface except a clean, hard area while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through discharge opening, damaging unit, property, or causing serious injury to bystanders or operator.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive

vapors or carbon monoxide build up could be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes,

rooftops, etc. Keep firm footing and balance at all times.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

D Never run unit without the proper equip- ment attached. When using your unit as a blower, always install blower tubes.

DCheck air intake opening and blower tubes, frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free from debris which can

accumulate and restrict proper air flow and cause damage to the unit.

DNever use for spreading chemicals, fertiliz- ers, or other substances which may contain toxic materials.

DTo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits,

ashtrays, etc.

D To reduce the risk of hearing loss associated with sound level(s), hearing protection is required.

D To reduce the risk of injury associated with contacting rotating parts, stop the engine be- fore installing or removing attachments. Do not operate without guard(s) in place.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

D Have all maintenance other than the rec- ommended procedures described in the Operator’s Manual performed by an Autho- rized Service Dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

DUse only recommended Weed EaterŽ parts; use of any other parts may void your war- ranty and cause damage to your unit.

-- 2 --

Image 2
Contents FL1500 For Household Use Only Handle Fuel with CAUTION, IT is Highly Flammable Know Your UnitPlan Ahead Operate Your Unit SafelyOperating Position AssemblyBlower Tube Operating TipsStarting Your Engine Carburetor AdjustmentsStopping Your Engine Starting PositionNeed ASSISTANCE? Troubleshooting Table Cause RemedyNeed Service PART? Maintenance Statement The owner is

530087893 specifications

The Weed Eater 530087893 is a highly regarded string trimmer, renowned for its reliability and efficient performance in maintaining lawns and gardens. This versatile tool is designed for both homeowners and landscaping professionals seeking a lightweight yet powerful solution for tackling overgrowth and achieving clean, manicured edges.

One of the standout features of the Weed Eater 530087893 is its powerful two-stroke engine. This engine provides robust performance while maintaining a compact design that makes the trimmer easy to handle. The engine is engineered for low emissions, making it environmentally friendly while still delivering the cutting power necessary for various types of vegetation.

The trimmer boasts a 17-inch cutting swath, allowing users to cover larger areas in less time. The wide cutting path enhances efficiency and reduces the need for multiple passes, making it an optimal choice for residential yards or expansive landscaping projects. The trimmer's adjustable cutting head also enables users to easily switch between different cutting angles, ensuring precise trimming along edges, flower beds, and hard-to-reach areas.

Another significant feature of the Weed Eater 530087893 is its ergonomic design, which prioritizes user comfort. The adjustable handle provides a customizable grip that aids in reducing fatigue during prolonged use. The lightweight construction is a notable advantage, making it ideal for users of all ages and physical capabilities.

This model is equipped with a dual-line feed system, allowing for easy reloading of trimmer line. Users can quickly and conveniently replace the line without needing any special tools, which significantly minimizes downtime during projects. Additionally, the bump-head feature allows for automatic line advancement; simply bump the trimmer against the ground to release more line when needed.

In terms of durability, the Weed Eater 530087893 is built with high-quality materials, ensuring that it can withstand the rigors of outdoor use. The sturdy construction not only enhances longevity but also contributes to the overall performance of the trimmer.

In summary, the Weed Eater 530087893 is a powerful and efficient string trimmer designed to meet the cutting needs of both casual gardeners and professional landscapers. With its powerful engine, generous cutting swath, ergonomic design, and user-friendly features, it stands out as an excellent choice for anyone looking to maintain a pristine outdoor space.