MAINTENANCE
TRACTOR -- MODEL NUMBER 259723
CHASSIS AND ENCLOSURES
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Pressure
Check Operator Presence and
TInterlock Systems
R Check for Loose Fasteners
ASharpen/Replace Mower Blades
C | Lubrication Chart |
T |
0Check Battery Level
RClean Battery and Terminals Check Transaxle Cooling Adjust Blade Belt(s) Tension Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level
Change Engine Oil
EClean Air Filter
NClean Air Screen
GInspect Muffler/Spark Arrester
I | Replace Oil Filter (If equipped) |
N |
EClean Engine Cooling Fins Replace Spark Plug
Replace Air Filter Paper Cartridge Replace Fuel Filter
EACH | HOURS | HOURSHOURS | HOURS | STORAGE | ||
| USE |
|
|
| SEASON |
|
| 8 | 25 | 50 | 100 |
| |
BEFOREEVERY EVERY EVERYEVERY EVERYBEFORE SERVICE DATES | ||||||
7
4
6
5
5
1,2,3
2
2
1, 2
2
2
KEY | PART |
|
NO. | NO. | DESCRIPTION |
1 | 169831 | Chassis Lt Stamping |
2 | 169061 | Drawbar |
3 | 17060612 | Screw |
5 | 155272 | Bumper Hood/Dash |
6 | 155924X012 | Saddle SLKSCRE FLT SDL |
8 | 155138 | Clip Retainer |
9168347X011 Dash Slkscr Plm Mech Sym
1072140608 Bolt RdHd Sqnk.
11 | 155927 | Panel Asm. Dash Lh |
12 | 145660 | Clip Tinnerman Grille P/L |
13 | 172107X010 | Panel Dash Rh |
1574180512 Screw Mach Trhd
1673510500 Nu Keps
17159639X550 Hood Pnt Steel Private Label
18 126938X Bumper Hood
2474780616 Bolt Fin Hex
2519131312 Washer 13/32 x 13/16 x 12 Ga.
2673800600 Nut Lock Hex w/Ins
28 | 157373 | Grill Private Lable Blk |
29 | 140273X599 | Lens Grille Private label |
30 | 169465X550 | Fender Pnt |
31 | 136619 | Bracket Fender Support |
1 | - Change more often when operating under a heavy load or in high ambient temperatures. | 5 | - If equipped with adjustable system. |
2 | - Service more often when operating in dirty or dusty conditions. | 6 | - Not required if equipped with |
3 | - If equipped with oil filter, change oil every 50 hours. | 7 | - Tighten front axle pivot bolt to 35 |
4 | - Replace blades more often when mowing in sandy soil. |
| Do not overtighten. |
33145476X550 Footrest Pnt. Lh
34145475X550 Footrest Pnt. Rh
3572110606 Bolt RdHd Sht. Sqnk.
3717490508 Screw Thdrol
38169834 Bracket Asm. Pivot Mower Rear
GENERAL RECOMMENDATIONS
LUBRICATION CHART
51 | 73800400 | Nut Lock Hex W/Ins. |
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tractor.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
➀Spindle Zerk
➀Front Wheel
Bearing
Zerk
➀Spindle Zerk
➀Front Wheel Bearing Zerk
➁Engine
52 | 19091416 | Washer 9/32 x 7/8 x 16 Ga. |
53 | 144697 | Bracket Grille LH |
54 | 161464 | Screw Hex Wshd |
55 | 144696 | Bracket, Grille RH |
57 | 74780412 | Bolt Fin Hex |
145 | 156524 | Rod Pivot Chassis /Hood |
206 | 170165 | Bolt Shoulder |
20817670608 Screw Thdrol
20917000612 Screw Hex Wsh Thdrol
- - | 5479J | Plug Button Blk .359 Dia. Choke |
NOTE: All component dimensions given in U. S. inches 1 inch = 25/4 mm
•Once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper
BEFORE EACH USE
•Check engine oil level.
•Check brake operation.
•Check tire pressure.
•Check operator presence and interlock systems for proper operation.
•Check for loose fasteners.
➀SAE OR 10W30 MOTOR OIL
➁REFER TO MAINTENANCE “ENGINE” SECTION
IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the
16sparingly.
33