Weed Eater 186073 manual To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 20

SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 21

TO CHECK AND ADJUST BRAKE (See Fig. 22)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 22

TO REPLACE MOTION DRIVE BELT (See Fig. 23)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model NO. WE165T42A Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsTo Start Engine See Fig Mowing TipsADD Gasoline Maintenance Lubrication ChartGeneral Recommendations Before Each USETractor Clean AIR Screen EngineBelts Transaxle CoolingCleaning Engine Cooling Fins SeeMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTo Remove Wheel for Repairs See Fig To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number WE165T42A, Product no 57Electrical KEY Part Description Chassis and Enclosures Repair Parts Drive Transaxle Peerless Model Steering Assembly Repair Parts Engine Repair Parts Seat Assembly Decals Wheels & TiresMower Lift Repair Parts Mower Deck CAB Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

186073 specifications

The Weed Eater 186073 is a notable addition to the world of outdoor power equipment, designed specifically for homeowners and gardening enthusiasts who value efficiency and ease of use. This electric string trimmer combines innovative features and cutting-edge technology to provide an exceptional lawn care experience.

One of the standout features of the Weed Eater 186073 is its powerful electric motor. Boasting a robust design, this trimmer delivers consistent performance without the hassles associated with gas-powered alternatives. The electric motor minimizes noise levels, making it an excellent choice for residential areas where maintaining peace and quiet is essential.

The Weed Eater also emphasizes user comfort with its lightweight construction. At just a few pounds, it enables extended use without causing fatigue, thereby making it suitable for individuals of varying strength. Additionally, the adjustable handle ensures optimal control and maneuverability, allowing users to navigate around flower beds, fences, and other obstacles with precision.

Another technological highlight of the Weed Eater 186073 is its automatic line feed system. This feature saves time by eliminating the need for manual adjustments. When the trimmer encounters tension, it seamlessly releases additional line, allowing users to maintain a continuous cutting edge without interruption. This system also minimizes line wastage, contributing to cost efficiency over time.

The trimmer is equipped with a 12-inch cutting width, which strikes an excellent balance between power and manageability for trimming grass and weeds. This width is perfect for small to medium-sized yards, making quick work of overgrown areas without being cumbersome.

Durability is a key characteristic of the Weed Eater 186073. Made with high-quality materials, it is built to withstand the rigors of outdoor use. Whether it's tackling tough weeds or simply maintaining a pristine lawn, this trimmer has been designed to perform reliably under various conditions.

Furthermore, the Weed Eater 186073 is eco-friendly, producing zero emissions during operation. This commitment to environmental responsibility aligns with the growing trend towards sustainable gardening practices.

In summary, the Weed Eater 186073 is a powerful, lightweight, and efficient electric string trimmer equipped with advanced features that cater to both novices and experienced gardeners. Its user-friendly design, durable construction, and smart technologies make it an indispensable tool for maintaining a beautiful lawn and garden. For those looking to simplify their yard work while achieving professional results, the Weed Eater 186073 stands out as an excellent choice.
Top Page Image Contents