Weed Eater 186073 manual HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig

Page 7

ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

•Lift seat pan to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model NO. WE165T42A Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills To TransportADD Gasoline Mowing TipsTo Start Engine See Fig Before Each USE MaintenanceLubrication Chart General RecommendationsTractor Transaxle Cooling Clean AIR ScreenEngine BeltsSpark Plugs CleaningEngine Cooling Fins See MufflerTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel ALIGN- MentTo Remove Wheel for Repairs See Fig To Remove CABLES, Reverse Order To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Attach Jumper CablesTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number WE165T42A, Product no 57 SchematicElectrical KEY Part Description Chassis and Enclosures Repair Parts Drive Transaxle Peerless Model Steering Assembly Repair Parts Engine Repair Parts Seat Assembly Wheels & Tires DecalsMower Lift Repair Parts Mower Deck CAB Service Notes Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

186073 specifications

The Weed Eater 186073 is a notable addition to the world of outdoor power equipment, designed specifically for homeowners and gardening enthusiasts who value efficiency and ease of use. This electric string trimmer combines innovative features and cutting-edge technology to provide an exceptional lawn care experience.

One of the standout features of the Weed Eater 186073 is its powerful electric motor. Boasting a robust design, this trimmer delivers consistent performance without the hassles associated with gas-powered alternatives. The electric motor minimizes noise levels, making it an excellent choice for residential areas where maintaining peace and quiet is essential.

The Weed Eater also emphasizes user comfort with its lightweight construction. At just a few pounds, it enables extended use without causing fatigue, thereby making it suitable for individuals of varying strength. Additionally, the adjustable handle ensures optimal control and maneuverability, allowing users to navigate around flower beds, fences, and other obstacles with precision.

Another technological highlight of the Weed Eater 186073 is its automatic line feed system. This feature saves time by eliminating the need for manual adjustments. When the trimmer encounters tension, it seamlessly releases additional line, allowing users to maintain a continuous cutting edge without interruption. This system also minimizes line wastage, contributing to cost efficiency over time.

The trimmer is equipped with a 12-inch cutting width, which strikes an excellent balance between power and manageability for trimming grass and weeds. This width is perfect for small to medium-sized yards, making quick work of overgrown areas without being cumbersome.

Durability is a key characteristic of the Weed Eater 186073. Made with high-quality materials, it is built to withstand the rigors of outdoor use. Whether it's tackling tough weeds or simply maintaining a pristine lawn, this trimmer has been designed to perform reliably under various conditions.

Furthermore, the Weed Eater 186073 is eco-friendly, producing zero emissions during operation. This commitment to environmental responsibility aligns with the growing trend towards sustainable gardening practices.

In summary, the Weed Eater 186073 is a powerful, lightweight, and efficient electric string trimmer equipped with advanced features that cater to both novices and experienced gardeners. Its user-friendly design, durable construction, and smart technologies make it an indispensable tool for maintaining a beautiful lawn and garden. For those looking to simplify their yard work while achieving professional results, the Weed Eater 186073 stands out as an excellent choice.
Top Page Image Contents