Weed Eater 178277 owner manual Mowing Tips, Purge Transmission

Page 15

OPERATION

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is run- ning.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have devel- oped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

•Your tractor is now purged and now ready for normal operation.

MOWING TIPS

•Tire chains cannot be used when the mower housing is attached to tractor.

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the tractor. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 11 ).

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mowing performance and proper dis- charge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting perfor- mance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

FIG. 11

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model NO. SGT18H46B Safe Operation Practices for Ride-On Mowers Safety RulesSafety Rules Table of Contents Slope Sheet Unassembled PartsSteering Wheel Gauge WheelsTo Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorTo Attach Nose Roller See Fig Install Seat See FigInstall Mower and Drive Belt See Figs Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level See Fig ADD GasolinePurge Transmission Mowing TipsCustomer Responsibilities General RecommendationsBefore Each USE Tractor Engine Muffler CleaningEngine Cooling Fins AIR FilterTo Remove Mower See Fig Service and AdjustmentsTo Install Mower To Level Mower HousingTo Replace Mower Drive Belt FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Service Notes Tractor - Model Number SGT18H46B SchematicElectrical KEY Part NO. NO.DESCRIPTION Chassis KEY Part Description Drive 161399 Steering Assembly KEY Part NO. NO.DESCRIPTION Engine 176174 Control, Throttle Seat Assembly Wheels & Tires DecalsMower Lift Washer 13/32 x 5/8 x 16 Ga Mower Deck KEY Part Description Limited Warranty Sighting Guide Suggested Guide for Sighting Slopes for Safe Operation

178277 specifications

The Weed Eater 178277 is a versatile and efficient tool designed for homeowners and gardening enthusiasts who seek a reliable solution for maintaining their lawns and gardens. This string trimmer stands out for its combination of powerful performance, user-friendly design, and modern technologies that enhance its functionality.

One of the key features of the Weed Eater 178277 is its robust engine that facilitates easy starting and powerful cutting performance. The engine is engineered to provide enough torque to handle various types of vegetation, whether it’s delicate grass or tougher weeds. Additionally, the machine operates efficiently, which helps in conserving fuel and minimizing emissions, making it an eco-friendly choice.

The trimmer incorporates a 17-inch cutting width, allowing users to cover more ground with each pass. This feature significantly reduces the time and effort spent on lawn maintenance, making it an ideal choice for larger yards. The adjustable handle also enhances comfort and control during operation, enabling users to tackle different cutting angles and heights with ease.

Equipped with an automatic line advancement system, the Weed Eater 178277 ensures that the cutting line feeds smoothly as it wears down. This feature eliminates the need for manual adjustments, saving time and providing a hassle-free experience. The trimmer uses a dual-line system, which not only enhances cutting performance but also contributes to a cleaner line of cut.

Another notable technology featured in the Weed Eater 178277 is its lightweight design. Weighing in at just over 10 pounds, it is easy to maneuver and transport, making it perfect for prolonged use without causing strain to the user. This is particularly beneficial for those who may not have the physical strength to handle heavier trimmers.

Also, maintaining the Weed Eater 178277 is straightforward, thanks to its simplified maintenance access points. Users can quickly check and replace parts if necessary, ensuring the longevity of the trimmer.

In summary, the Weed Eater 178277 combines performance, convenience, and durability into a powerful package that appeals to both casual gardeners and serious lawn care enthusiasts. With its blend of innovative features and user-centric design, it is a reliable companion for keeping lawns looking pristine.
Top Page Image Contents