Weed Eater 530086783 Installing Attachment Hanger, Operating Position, Edging, Always Wear

Page 7

4.Before using the unit, tighten the knob se- curely by turning clockwise.

INSTALLING ATTACHMENT

HANGER

An attachment hanger is provided for storage when attachment is not in use.

To install hanger on attachment:

1.Remove the tube cap from the attachment (if present) and discard.

2.Press and hold the locking/release button.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing.

SKeep right arm slightly bent with right hand holding the trigger handle of powerhead.

SKeep left arm extended with left hand hold- ing the handlebar.

SKeep unit below waist level.

SAdjust edger wheel for proper cut depth.

WARNING: Never attempt to adjust the edger wheel when the unit is in operation. Always stop the powerhead, wait until the blade stops turning, and disconnect the spark plug (or disconnect powerhead from power source) before making adjustments.

EDGING

As you become familiar with use of your edger attachment, you will be able to determine your own operating pace. Conditions such as depth of cut and material being cut will regu- late the speed and time required for your edg- ing job.

SAllow the engine to warm up before you begin

edging.

SIncrease the engine speed before placing the blade in the cut. For best results, run the en- gine at full throttle while cutting.

S Always work going away from people and solid objects such as walls, large stones, trees, automobiles, etc.

SBe careful when edging near trees or valuable plants. The high speed metal blade may cut

roots and cause damage to the plants.

SIf the blade stalls, immediately move the unit back slightly to allow the blade to restart. If the blade continues to stall, stop the engine, dis- connect the spark plug, and inspect for block- age or damage.

WARNING: Keep the blade area clean. Always release the throttle trigger, move the powerhead ON/OFF switch to the OFF position, disconnect the spark plug (or disconnect powerhead from power source), and make sure the blade has completely stopped turning before cleaning.

SETTING THE EDGING DEPTH

WARNING: Never attempt to adjust the cut depth when the engine is running. Al- ways release the throttle trigger, wait until the blade stops turning, move the powerhead ON/OFF switch to the OFF position, and dis- connect spark plug (or disconnect from pow- er source) before making adjustments.

Depth Adjustment Knob

1.Loosen the depth adjustment knob.

2.Slide the wheel to the desired position.

S Raising the wheel will increase the cut- ting depth.

S Lowering the wheel will decrease the cutting depth.

3.Tighten the depth adjustment knob se- curely.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Safety Information On the Unit Operator SafetyEdging Safety UNIT/MAINTENANCE SafetyReleased Transporting and StorageAttachment END Handlebar AssemblyPowerhead END Tools RequiredLocking Lever Blade Depth Adjustment KnobInstalling Attachment Know Your Edger AttachmentEdging Installing Attachment HangerSetting the Edging Depth Operating PositionCheck for Damaged or Worn Parts Inspect and Clean Unit and DecalsBlade Maintenance Blade ReplacementSeasonal Storage

530086783 specifications

The Weed Eater 530086783 is a powerful and efficient string trimmer designed to meet the needs of both homeowners and professionals. It combines advanced technology with a user-friendly design, making it an essential tool for maintaining a well-groomed lawn and garden.

At the heart of the Weed Eater 530086783 is its robust 25cc two-stroke engine. This powerful engine provides ample power to tackle tough weeds and overgrown grass, ensuring that your landscaping tasks can be completed quickly and efficiently. The lightweight design of the trimmer, weighing in at just over 10 pounds, ensures that users can maneuver it easily without experiencing fatigue during extended use.

One of the standout features of the Weed Eater 530086783 is its split shaft design. This innovative design allows for easy attachment changes, enabling users to switch from trimming to edging or even blowing leaves with the addition of compatible accessories. This versatility makes it a valuable addition to any homeowner’s toolkit or landscaping professional’s arsenal.

The trimmer also features an easy-to-use bump feed system, which ensures that the string advances efficiently while you work. With a simple bump of the head against the ground, you can release more line, minimizing downtime and keeping you focused on the job at hand. The 0.095-inch line provides an excellent cutting width, allowing for greater coverage with each pass.

For user comfort and safety, the Weed Eater 530086783 is equipped with an adjustable handle that allows for multiple gripping positions. This feature provides better control and ergonomics, reducing strain on the user during operation. Additionally, the trimmer comes with a protective shield that helps direct debris away from the user, ensuring a safer mowing experience.

The design of the Weed Eater 530086783 also emphasizes easy starting. The engine incorporates a primer bulb and choke that simplify the starting process, making it accessible even for those who may be new to using string trimmers.

In summary, the Weed Eater 530086783 stands out with its powerful engine, lightweight design, and flexible attachment options. Its bump feed mechanism, adjustable handle, and easy start technology make it an exceptional choice for effectively managing yard work, providing users with both performance and convenience.
Top Page Image Contents