Weed Eater 31WG, 530088154 Operating the Coupler, Operating Position, Locking/Release Button

Page 10

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . . .1000E Cultivator . . . . . . . . . . . . . . . . . . .2000T Blower . . . . . . . . . . . . . . . . . . . . . .3000B Brushcutter . . . . . . . . . . . . . . . . . 4000C

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL AT- TACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Tube

Coupler

Coupler Primary Hole

Guide Recess

Upper Locking/ Attachment

Tube Release

Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

Cut from your right to your left.

Lower

LOOSEN

AttachmentWARNING: Always wear eye protec- tion. Never lean over the trimmer head.

TIGHTEN Knob

Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

2. Press and hold the locking/release button.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise

Locking/Release

Button

and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool. Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

Coupler

Upper Tube

Lower Attachment

To stop engine:

SRelease the throttle trigger.

3.While securely holding the engine and upper tube, pull the attachment straight out of the coupler.

SMove the ON/OFF switch to the OFF posi- tion.

TRIMMER LINE ADVANCE

INSTALLING OPTIONAL ATTACH-

MENTS

The cutting head advances line automati- cally. Do not tap head on the ground to ad- vance line. This may break parts and cause cutting head to malfunction.

1.Remove the tube cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Upon unit start up, the line will advance auto- matically to the correct cutting path length. Always keep the shield in place when the tool is being operated.

WARNING: Use only .080” (2 mm) diameter round line. Other sizes and shapes of line will not advance properly and will result in improper cutting head function or

10

Image 10
Contents Manual de Instrucciones Manuel d’Instructions 3000B Operator Safety31WG Eye Protection Hazard ZoneLine Trimmer Safety Unit / Maintenance SafetyFuel Safety Transporting and StorageBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Hedge Trimmer Safety Pole Pruner Safety Cultivator SafetyProboscis nose Know how to stop quickly Snow Thrower SafetyHigh speed causing injury Or brokenAttaching Shield Installing Trimmer ATTACH- MentAdjusting the Handle ReleaseKnow Your Trimmer ON/OFF Switch ChokeHOW to Stop Your Unit Primer BulbStarting a Warm Engine HOW to Start Your UnitStarting a Flooded Engine Operating Position Trimmer Line Advance Installing Optional Attach MentsOperating the Coupler Press and hold the locking/release buttonCutting Methods RightWrongLine Replacement Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsSeasonal Storage Installing Spool with LineCarburetor Adjustment Fuel SystemTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC Agency and POULAN/WEED EATER, Divi

530088154, 31WG specifications

The Weed Eater 31WG,530088154 is a versatile and powerful cordless string trimmer designed for homeowners who require an efficient tool for maintaining their lawns and gardens. With a blend of innovative technologies and user-friendly features, this model stands out for its performance and ease of use.

One of the key features of the Weed Eater 31WG is its lightweight design, weighing in at just around 5.5 pounds. This makes it easy to maneuver, reducing user fatigue during extended use. The trimmer's ergonomic handle provides a comfortable grip, allowing for excellent control and precision while trimming grass or weeds in tight spaces.

Equipped with a 10-inch cutting width, the 31WG effectively navigates through various types of vegetation, making it suitable for tackling both small yards and larger landscaping tasks. The engine generates reliable power to cut through thick grass and overgrown areas without bogging down. A feature that enhances usability is the automatic line feed system, which allows users to quickly and effortlessly advance the cutting line as needed, ensuring continuous trimming without interruptions.

Another notable characteristic of the Weed Eater 31WG is its dual-line operation. This feature provides improved cutting efficiency and ensures a clean finish in every trimming session. The trimmer also supports a variety of line types, allowing users to choose the best option for their specific yard care needs.

In terms of technology, the Weed Eater 31WG incorporates a reliable electric motor that eliminates the hassle of gas and oil mixtures. This not only simplifies maintenance but also contributes to a cleaner environment, making it a great option for eco-conscious consumers. With its quieter operation, users can also enjoy a peaceful gardening experience without disturbing the neighborhood.

The adjustable shaft of the 31WG allows for customization according to individual user height preferences, making it suitable for users of various statures. Additionally, the trimmer's durable construction ensures longevity, promising years of reliable service with proper care.

Overall, the Weed Eater 31WG,530088154 offers an excellent combination of power, mobility, and ease of use, making it an ideal choice for homeowners looking to simplify their lawn care routine. Its thoughtful design and features allow for efficient trimming while keeping usability in mind.