Carburetor Adjustments, Ignition Timing

SInsert the line into the the exit hole in the hub as shown in the illustration.

SAlign the notch with the line exit hole.

SPush spool into hub until it snaps into place. S Pull the line extending outside of the hub to

release it from the notch.

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

WARNING: Muffler is very hot during and after use. Do not touch the muffler or al- low combustible material such as dry grass or fuel to do so.

We recommend all service and adjustments not listed in this manual be performed by an authorized service dealer.

CARBURETOR ADJUSTMENTS

Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

IGNITION TIMING

The ignition timing is fixed, non-adjustable.

SPARK PLUG

Replace the spark plug yearly using a Cham- pion RCJ--7Y plug. Spark plug gap is 0.025”.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE	CAUSE		REMEDY
Engine will not	S	ON/OFF switch in OFF	S	Move ON/OFF switch to ON.
start.		position.		See “Starting.”
	S	Engine flooded.	S	See “Starting.”
	S	Fuel tank empty.	S	Fill tank with correct fuel mixture.
	S	Spark plug not firing.	S	Install new spark plug.
	S	Fuel not reaching carburetor.	S	Check for dirty fuel filter; replace.
				Check for kinked or split fuel line;
		Carburetor requires adjustment.		repair or replace.
	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
Engine will not	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
idle properly.	S	Throttle trigger screw too	S	Loosen screw.
		tight.
Engine will not	S	Air filter dirty.	S	Clean or replace air filter.
accelerate,	S	Spark plug fouled.	S	Clean or replace spark plug; re-gap.
lacks power,	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
or dies under
a load.
Engine	S	Fuel mixture incorrect.	S	Empty fuel tank and refill with
smokes		Air filter dirty.		correct fuel mixture.
excessively.	S	Air filter dirty.	S	Clean or replace air filter.
	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
Line does not	S	Line improperly routed in head.	S	Check line routing.
advance or	S	Line improperly wound on	S	Rewind line tightly and evenly.
breaks while		spool.		Use only 0.080” (2 mm) dia. line.
cutting.	S	Line size incorrect.	S	Use only 0.080” (2 mm) dia. line.
Line welds	S	Line size incorrect.	S	Use only 0.080” (2 mm) dia. line.
onto spool.	S	Incorrect spool.	S	Replace with correct spool.
	S	Line is being crowded against	S	Cut with tip of line fully extended.
		material being cut.
Line pulls	S	Too little line outside of head.	S	Remove spool and pull 4 inches
back into				(10 cm) of line outside of head.
head.	S	Line size incorrect.	S	Use only 0.080” (2 mm) dia. line.

		5

530086412 specifications

The Weed Eater 530086412 is a versatile and reliable outdoor power tool designed for both residential and commercial users. This weed eater stands out for its cutting-edge features and advanced technology, making it an excellent option for tackling overgrown lawns, gardens, and other green spaces.

One of the primary features of the Weed Eater 530086412 is its powerful engine. The 28cc two-stroke engine delivers impressive torque and cutting power while remaining lightweight and easy to maneuver. This makes it ideal for extended use without causing excessive fatigue. The engine is designed to run efficiently, providing a balance of power and fuel economy that keeps efficiency at the forefront of your yard maintenance.

Another significant characteristic of the Weed Eater 530086412 is its innovative cutting system. It is equipped with a dual-line head that allows for quick and easy line replacements. The auto-feed feature ensures that the cutting line is automatically adjusted to the ideal length during operation, making it hassle-free. Additionally, it supports different line sizes, providing versatility for various cutting tasks.

Ergonomically designed, this weed eater features a comfortable handle and a shoulder strap that enhances user comfort during prolonged use. The lightweight design reduces strain on the operator’s arms and back, allowing for easier maneuverability around tight corners and landscaping obstacles.

Users can appreciate the convenience of the Weed Eater 530086412's easy-start technology. The tool incorporates a simplified starting system that minimizes the pull effort required to start the engine, making it accessible for individuals of all experience levels. This feature is particularly useful for those who may struggle with traditional pull-start systems.

Moreover, the Weed Eater 530086412 offers adjustable handle positions, allowing users to customize the tool's setup according to their height and preferred cutting angle. This flexibility ensures a more comfortable and effective cutting experience, enhancing productivity during yard work.

In conclusion, the Weed Eater 530086412 excels in performance, convenience, and ergonomic design. Its robust engine, auto-feed cutting system, and user-friendly features make it a standout choice for both casual gardeners and landscape professionals. Whether you're maintaining your lawn or tackling tougher weed problems, this model provides the power and flexibility needed to get the job done efficiently.

CARBURETOR ADJUSTMENTS

IGNITION TIMING

SPARK PLUG

TROUBLESHOOTING TABLE

CAUSE

REMEDY

530086412 specifications