Weed Eater 530163711 instruction manual Seasonal Storage, Fuel System, Engine, Other

Page 9

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 23/03 530163711Operator Safety Unit / Maintenance SafetyFuel Safety Transporting and Storage Cutting SafetyAttaching Shield OperatorKnow Your Trimmer ON/OFF Switch ChokePrimer Bulb Edge GuideHOW to Start Your Unit HOW to Stop Your UnitStarting a Warm Engine Starting a Flooded EngineTwist and Edge Operating PositionTrimmer Line Advance Cutting MethodsClean AIR Filter Inspect and Clean Unit and LabelsCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsInstalling Spool with Line Line ReplacementCarburetor Adjustment Refilling the Spool with LineFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Improve its products. Therefore Specifically recommended byConsequential Damages Elec

530163711 specifications

The Weed Eater 530163711 is a powerful and efficient solution for yard maintenance, designed to make trimming grass and clearing weeds easier and more effective. It stands out due to its user-friendly features and advanced technology, making it an essential tool for homeowners and landscaping professionals alike.

One of the main features of the Weed Eater 530163711 is its lightweight design. Weighing in at just around 10 pounds, it is easy to maneuver and reduces fatigue during extended use. Users can comfortably handle the trimmer for long periods, making it an ideal option for large lawns or gardens with hard-to-reach areas.

This model is equipped with a robust, gasoline-powered engine that ensures high performance and reliability. The powerful motor delivers impressive speed and cutting ability, allowing for quick and efficient trimming. Its cutting width of 17 inches allows users to cover significant ground in a shorter amount of time, making yard work less time-consuming.

The Weed Eater 530163711 features a patented dual-line advancement system. This technology enables the user to easily feed the line, ensuring consistent cutting performance without interruption. The auto-feed mechanism automatically releases fresh line when needed, preventing downtime and increasing productivity.

Another notable aspect is the adjustable telescoping shaft. This feature allows users to customize the length of the trimmer to their preferred height, promoting comfort and preventing unnecessary strain on the back and arms. Additionally, the angled head can be adjusted for versatility, allowing for both vertical and horizontal trimming, which is particularly useful for edges and borders.

In terms of safety, the Weed Eater 530163711 is equipped with an important safety guard that protects the user from debris and ensures a safer working environment. Furthermore, the ergonomic handle provides a secure grip, further enhancing comfort and control during operation.

In conclusion, the Weed Eater 530163711 is a reliable and efficient lawn care tool that combines advanced features and ergonomic design. With its powerful engine, lightweight construction, and user-friendly technology, this trimmer offers an excellent solution for managing weeds and maintaining a well-groomed landscape. It's an essential addition to any gardening toolkit.
Top Page Image Contents