Weed Eater 530163711 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 7

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

EDGING-- Adjust trimmer to the edging posi- tion (see TWIST AND EDGE section). Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Edging

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel

tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter Cover

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 23/03 530163711Unit / Maintenance Safety Operator SafetyFuel Safety Operator Cutting SafetyTransporting and Storage Attaching ShieldEdge Guide ON/OFF Switch ChokeKnow Your Trimmer Primer BulbStarting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Operating PositionTwist and Edge Trimmer Line AdvanceCheck for Damaged or Worn Parts Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsRefilling the Spool with Line Line ReplacementInstalling Spool with Line Carburetor AdjustmentOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Improve its products. Therefore Specifically recommended byConsequential Damages Elec

530163711 specifications

The Weed Eater 530163711 is a powerful and efficient solution for yard maintenance, designed to make trimming grass and clearing weeds easier and more effective. It stands out due to its user-friendly features and advanced technology, making it an essential tool for homeowners and landscaping professionals alike.

One of the main features of the Weed Eater 530163711 is its lightweight design. Weighing in at just around 10 pounds, it is easy to maneuver and reduces fatigue during extended use. Users can comfortably handle the trimmer for long periods, making it an ideal option for large lawns or gardens with hard-to-reach areas.

This model is equipped with a robust, gasoline-powered engine that ensures high performance and reliability. The powerful motor delivers impressive speed and cutting ability, allowing for quick and efficient trimming. Its cutting width of 17 inches allows users to cover significant ground in a shorter amount of time, making yard work less time-consuming.

The Weed Eater 530163711 features a patented dual-line advancement system. This technology enables the user to easily feed the line, ensuring consistent cutting performance without interruption. The auto-feed mechanism automatically releases fresh line when needed, preventing downtime and increasing productivity.

Another notable aspect is the adjustable telescoping shaft. This feature allows users to customize the length of the trimmer to their preferred height, promoting comfort and preventing unnecessary strain on the back and arms. Additionally, the angled head can be adjusted for versatility, allowing for both vertical and horizontal trimming, which is particularly useful for edges and borders.

In terms of safety, the Weed Eater 530163711 is equipped with an important safety guard that protects the user from debris and ensures a safer working environment. Furthermore, the ergonomic handle provides a secure grip, further enhancing comfort and control during operation.

In conclusion, the Weed Eater 530163711 is a reliable and efficient lawn care tool that combines advanced features and ergonomic design. With its powerful engine, lightweight construction, and user-friendly technology, this trimmer offers an excellent solution for managing weeds and maintaining a well-groomed landscape. It's an essential addition to any gardening toolkit.
Top Page Image Contents