Sears 486.24412 Ihex Lock NUT, Carriage Bolt Lock Washer Cable Mount Bracket, Push, Remove 3/8

Page 5

4.Assemble angle stop to top of channel using one

1/4" x 5/8" hex bolt down through left hand hole, and one 1/4" hex lock nut under channel. See

figure 5. Do not tighten at this time,

I_"HEX LOCK NUT

CHANNEWPIVOT

 

PLATE

_BLY

1/4" X 5/8"

HEX BOLT

ANGLE STOP

FIGURE-5

5.Assemble 3/8" x 1-1/4" carriage bolt through square hole in cable mount bracket and through square hole in lock bars. See figures 6 and 7. Hold cable

mount bracket in position as shown in figure 7 and secure with 3/8= lock washer and 318" hex lock

nut.

 

,1

318" X 1-114"

318" HEX NUT

CARRIAGE BOLT

LOCK WASHER

\

 

CABLE MOUNT

 

BRACKET

 

FIGURE 6

6.Assemble one 5/16-24" hexjam nut onto threaded end of control cable approximately 3/4" from end. Assemble threaded cable end through round hole in cable mount bracket and secure with another 5/16-24" hex jam nut. See figure 7.

CABLE

MOUNT

t BRACKET

,.°-..EX [

7.Assemble ball end of cable through round hole in cable end fitting and into slot of fitting. See figures 7 and 8.

1/4" X 1-1/4"

HEX BOLT

CABLE END

LONG SPACER

FITTING

 

ANGLE STOP

 

PUSH

1_" HEX LOCK NUT

FIGURE 8

8.Assemble 1/4" x 1-1/4" hex bolt down through cable end fitting, through long spacer, angle stop, (right hand hole)and through channel. See figure

8.Secure with 1/4" hex lock nut and tighten the other 1/4" hex lock nut, which was left loose in

step 4. NOTE: Keep cable and fitting in align- ment with cable mount bracket when tighten-

ing nuts.

ASSEMBLY OF SNOW BLADETO LAWN

TRACTOR,(TractorPreparation)

A.Remove mower or any other attachment you may have mounted to your tractor. Mark all loose parts

and save for re-assembly. Refer to tractor owners manual for removal of mower/attachment.

B. Remove and save suspension arm with nut and

washer from both lift link rods and up stop bracket with nuts and bolts from tractor frame to allow

assembly of snow blade. Also remove the 318" self-tapping bolts from each side of the tractor

frame as shown in figure 9. The lift link nuts will be used later to install snow blade brackets.

REMOVE 3/8"

FRONT ---*"

SELF-TAP BOLTS

TRACTOR FRAME

 

R.H. SIDE

ARM

LIFT LINK NUT AND WASHER

NUTS _

(REMOVE AND SAVE

UP STOP

FIGURE 7

BRACKET

FIGURE 9

5

Image 5
Contents Dozer Blade Rules for Safe Operations Safety is InvolvedCarton Contents QTY Description HexBolt5116-18x1-112 Contents of Parts Package FigureAssembly Instructions Carriage Bolt Lock Washer Cable Mount Bracket Ihex Lock NUTPush Remove 3/8Hitch Plates Spring Adjustment Bolts Plastic CAP Blade ReadHEX Bolt Clearance 1/2 X 16 Washers Minimum HEX BoltBracket LH Clevis Pins See Adjustment Section on 10 for Spring TensionAssembly Lock NUT Lift Link RODLift Spring Back View Tractoi Adjustment Bolt JAMRight Hand Side View Front FlatHandle Hairpin Cotter Lift LeverGuide HEX Bolt Lock NUTSudden Stops of Change Hidden Objects can Cause Direction AdjustmentsLift Control Lever Attachmentlever Depth Control KnobGround Before Leaving Always Lower Blade to Tractor OperationHairpin Cotter Handle Assembly Supportguide Bracket Cotters Guide Bracket AssemblyTo Remove Dozer Blade from Tractor ARMStorage Customer ResponsibilitesRepair Parts for Model Dozer Blade QTY,DESCRIPTION Repaih Parts List for Model Dozer BladeNO. Part NO, QTY Description PnINTEDtNU.S.A Manual

486.24412 specifications

The Sears 486.24412 is a significant entry in the realm of consumer electronics, notably during the time of rapid technological advancement in the late 20th century. Launched as part of a broader line of products aimed at home and small office environments, the 486.24412 represents the height of the IBM-compatible PC era, offering users an efficient blend of performance and user accessibility.

One of the standout features of the Sears 486.24412 is its powerful 80486 processor, which was a game-changer in the computing landscape. This processor allowed for improved computing speed and efficiency, paving the way for enhanced multitasking capabilities. Coupled with its advanced mathematics coprocessor, users could perform complex calculations and run software demanding higher computational power with relative ease.

The system typically came with a range of memory options, most often starting from 4MB of RAM, expandable to 32MB. This scalability was vital for users who required more from their devices, particularly for applications that utilized large datasets or graphic-heavy software. The enhanced memory capacity allowed for smoother operation and reduced loading times, enhancing overall user experience.

In terms of storage, the Sears 486.24412 included a standard hard drive, often beginning at around 100MB, which was considerable at the time. The hard drive was complemented by a floppy disk drive, enabling easy data transfer and software installation from external media. Users appreciated the inclusion of multimedia capabilities, with options for sound cards and graphics accelerators that appealed to gamers and graphic designers alike.

The 486.24412 also featured a dedicated video display adapter that supported various resolutions, catering to both text-based applications and graphical user interfaces. This flexibility made it suitable for diverse tasks ranging from word processing to more intensive graphical applications.

Connectivity options were ahead of their time, with the inclusion of parallel and serial ports allowing for the connection of printers and other peripherals. Additionally, the possibility of networking via Ethernet expanded the usability of the 486.24412 in office environments, paving the way for shared resources and collaborative work.

Overall, the Sears 486.24412 encapsulated the technological advances of its era while providing a robust, user-friendly experience. It aimed to meet the demands of both everyday users and professionals, highlighting the importance of performance and versatility in computing.