McCulloch 115376827, MC125 Unit / Maintenance Safety, Fuel Safety, Transporting and Storage

Page 5

SUse only for jobs explained in this manual (or manuals for optional attachments).

UNIT / MAINTENANCE SAFETY

SDisconnect the spark plug before performing maintenance except carburetor adjustments.

SLook for and replace damaged or loose parts

before each use. Look for and repair fuel leaks before use. Keep in good working condition.

SReplace trimmer head parts that are chipped, cracked, broken, or damaged in any other

way before using the unit.

S Maintain unit according to recommended procedures. Keep cutting line at proper length.

S Use only 0.115 inch (3 mm) diameter cut length line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely

fastened.

S Make sure unit is assembled correctly as shown in this manual.

SMake carburetor adjustments with lower end supported to prevent line from contacting any

object.

SKeep others away when making carburetor adjustments.

S Use only recommended McCulloch accessories and replacement parts.

S Have all maintenance and service not explained in this manual performed by an authorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before removing fuel cap.

S Always store gasoline in a container approved for flammable liquids.

TRANSPORTING AND STORAGE

S Allow engine to cool; secure unit before storing or transporting in vehicle.

S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Store unit so line limiter blade cannot accidentally cause injury. The unit can be hung by the shaft.

S Store unit out of reach of children.

WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who oper- ate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

LINE TRIMMER SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

S Use only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or hedge trimming.

SCut from your left to your right. Cutting on right side of the shield will throw debris away from the operator.

ADDITIONAL SAFETY RULES

FOR OPTIONAL ATTACHMENTS

WARNING: For each optional at- tachment used, read entire instruction manu- al before use and follow all warnings and in- structions in manual and on attachment.

WARNING: Ensure handlebar is installed when using brushcutter attachment. Attach handlebar above arrow on safety label on the upper shaft (engine end of unit). If your brushcutter attachment does not include a handlebar, a handlebar accessory kit (#530071451) is available from your autho- rized service dealer.

5

Image 5
Contents English Español Français Manual de Instrucciones Manuel d’InstructionsHazard zone for thrown objects Identification of Safety SymbolsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety HandlebarPole Pruner Safety Cultivator SafetyHedge Trimmer Safety High speed causing injury Snow Thrower SafetyKnow how to stop quickly Keep the rotor clear of debrisInstalling Trimmer ATTACH- Ment AssemblyAdjusting the Handle Attaching the ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitStarting a Cold Engine Starting a Warm EngineRemoving Trimmer ATTACH- Ment or Other Optional Attachments Installing Optional ATTACH- MentsOperating Position Remove the shaft cap from the attach- ment if presentTip of the line Cutting MethodsDoes the cutting Work area Inches 8 cm above groundMaintenance Carburetor Idle Speed Adjustment Service and AdjustmentsReplacing the Line Replacing the Cutting HeadFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Harris Corners Limited WarrantyCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115376827, 966625001, MC125 specifications

The McCulloch 966625001, also known as the MC125, is a powerful and efficient chainsaw designed to meet the demands of both professional and domestic users. This model stands out due to its advanced features, robust technologies, and user-friendly characteristics, making it a popular choice among tree care specialists, landscapers, and homeowners alike.

One of the key features of the MC125 is its powerful engine. It is equipped with a 25cc two-stroke engine, delivering impressive performance for cutting through various types of wood efficiently. The engine is designed with McCulloch's innovative OxyPower technology, which enhances its fuel efficiency and reduces exhaust emissions. This technology not only supports environmentally-friendly practices but also ensures longer run times between refueling, which adds convenience during extended use.

The MC125 is designed with ease of use in mind. It features a lightweight construction that minimizes user fatigue, making it ideal for prolonged operation. The ergonomic handle further enhances comfort and control, allowing for precise maneuvers while cutting. The chainsaw also incorporates an automatic chain lubrication system, which helps keep the chain running smoothly while minimizing wear and tear.

Another remarkable characteristic of the McCulloch MC125 is its safety features. The chainsaw includes a chain brake that acts quickly to halt the chain in the event of kickback, thereby protecting the user from potential injuries. Additionally, a throttle lockout ensures that the engine only runs when it is safe, offering peace of mind during operation.

The MC125's chain and bar system is designed for versatility, capable of handling various cutting tasks, from small branches to larger logs. The fast chain speed enables rapid cutting, making it a practical tool for both professionals and DIY enthusiasts.

In summary, the McCulloch 966625001, or MC125, is a well-engineered chainsaw that combines power, efficiency, and safety. Its advanced OxyPower engine technology, lightweight design, and ergonomic features make it an excellent choice for users looking for reliability and ease of use. With its commitment to performance and user safety, the MC125 stands out in the competitive chainsaw market, catering to a wide range of cutting needs and preferences. Whether for light yard work or larger tree care tasks, the MC125 delivers a satisfying user experience.