McCulloch 966625001, MC125, 115376827 Cultivator Safety, Hedge Trimmer Safety, Pole Pruner Safety

Page 7

SInstall required shield properly before using the unit. Use the metal shield for all metal blade use. Only use brushcutter attachments that provide a metal shield with proboscis nose.

Proboscis nose

disconnected, and the blade has stopped mov- ing before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

SUse only specified blade and make sure it is

properly installed and securely fastened.

SCut from your right to your left.

SAlways use the handlebar and a properly adjusted shoulder strap with blade (see ASSEMBLY instructions in brushcutter attachment instruction manual).

CULTIVATOR SAFETY

WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the engine and disconnect the spark plug before unclogging tines or making repairs.

WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.

S Avoid heavy contact with solid objects that might stop the tines. If heavy contact occurs, stop the engine and inspect the unit for damage.

SNever operate the cultivator without the tine cover in place and properly secured.

SKeep the tines and guard clear of debris. S After striking a foreign object, stop the engine, disconnect the spark plug and inspect the cultivator for damage. Repair

before restarting.

S Disconnect attachment from the drive engine before cleaning the tines with a hose and water to remove any build--up. Oil the tines to prevent rust.

S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.

S Do not run unit at high speed unless cultivating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade moves momentarily after the trigger is released or en- gine is turned off. Do not attempt to clear away cut material when the blade is in motion. Make sure engine is turned off, the spark plug wire is

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by an authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

POLE PRUNER SAFETY

WARNING: The reciprocating blade/ rotating chain can cause severe injury. In- spect the unit before use. Do not operate unit with a bent, cracked or dull blade or dull chain. Keep away from the blade/chain.

WARNING: The reciprocating blade/ rotating chain is sharp. Do not touch. To pre- vent serious injury, always stop engine and ensure blade/chain has stopped moving, dis- connect spark plug, and wear gloves when changing or handling the blade or chain.

WARNING: A coasting blade/rotat- ing chain can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade/chain has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade or chain when it is moving.

WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents English Español Français Manual de Instrucciones Manuel d’InstructionsHazard zone for thrown objects Identification of Safety SymbolsIdentification of Safety Symbols Operator Safety Safety RulesOptional Attachments Additional Safety Rules Unit / Maintenance SafetyFuel Safety Line Trimmer SafetyHandlebar Edger SafetyBLOWER/VACUUM Safety Brushcutter SafetyHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Keep the rotor clear of debris Snow Thrower SafetyHigh speed causing injury Know how to stop quicklyAttaching the Shield AssemblyInstalling Trimmer ATTACH- Ment Adjusting the HandleOperation Starting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Cold EngineRemove the shaft cap from the attach- ment if present Installing Optional ATTACH- MentsRemoving Trimmer ATTACH- Ment or Other Optional Attachments Operating PositionInches 8 cm above ground Cutting MethodsTip of the line Does the cutting Work areaMaintenance Replacing the Cutting Head Service and AdjustmentsCarburetor Idle Speed Adjustment Replacing the LineOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyHarris Corners Canada, contactIntermediate 125 hours Extended 300 hours

115376827, 966625001, MC125 specifications

The McCulloch 966625001, also known as the MC125, is a powerful and efficient chainsaw designed to meet the demands of both professional and domestic users. This model stands out due to its advanced features, robust technologies, and user-friendly characteristics, making it a popular choice among tree care specialists, landscapers, and homeowners alike.

One of the key features of the MC125 is its powerful engine. It is equipped with a 25cc two-stroke engine, delivering impressive performance for cutting through various types of wood efficiently. The engine is designed with McCulloch's innovative OxyPower technology, which enhances its fuel efficiency and reduces exhaust emissions. This technology not only supports environmentally-friendly practices but also ensures longer run times between refueling, which adds convenience during extended use.

The MC125 is designed with ease of use in mind. It features a lightweight construction that minimizes user fatigue, making it ideal for prolonged operation. The ergonomic handle further enhances comfort and control, allowing for precise maneuvers while cutting. The chainsaw also incorporates an automatic chain lubrication system, which helps keep the chain running smoothly while minimizing wear and tear.

Another remarkable characteristic of the McCulloch MC125 is its safety features. The chainsaw includes a chain brake that acts quickly to halt the chain in the event of kickback, thereby protecting the user from potential injuries. Additionally, a throttle lockout ensures that the engine only runs when it is safe, offering peace of mind during operation.

The MC125's chain and bar system is designed for versatility, capable of handling various cutting tasks, from small branches to larger logs. The fast chain speed enables rapid cutting, making it a practical tool for both professionals and DIY enthusiasts.

In summary, the McCulloch 966625001, or MC125, is a well-engineered chainsaw that combines power, efficiency, and safety. Its advanced OxyPower engine technology, lightweight design, and ergonomic features make it an excellent choice for users looking for reliability and ease of use. With its commitment to performance and user safety, the MC125 stands out in the competitive chainsaw market, catering to a wide range of cutting needs and preferences. Whether for light yard work or larger tree care tasks, the MC125 delivers a satisfying user experience.
Top Page Image Contents