Stereo Music System
FM/AM Broadcast Reception
Source | Volume | Select | FM/AM |
/Power |
Phones
Track 
/Seek 
Disc
12
Preset 
3
Memory
Band selector
Preset Station button
Auto Tuning button/Manual Tuning button
Main Unit (Top)
Automatic tuning
1.With the Band selector, select the desired frequency band.
2.Press and hold down the Auto Tuning button (for at least about 1 second) to start automatic tuning.
3.To continue automatic tuning, again press and hold down the Auto Tuning button (for at least about 1 second.)
-When receiving a stereo broadcast, the ST indicator is displayed on the display.
-Use manual tuning for stations that cannot be received
with automatic tuning.
...............................................................................................
Manual tuning
1.Select the desired frequency band with the Band selector.
2.Use the Manual Tuning buttons to tune in the frequency of the station you wish to listen to.
Preset Memory
1.Use manual or automatic tuning to tune in the station you wish to preset.
2.When you press the Memory button on the main unit, the Memory indicator flashes. While the Memory indicator is flashing (about 5 seconds), select the desired preset num- ber
3.Press the Memory button on the main unit again.
-The Memory indicator on the display stops flashing and stays lit for a while. When it goes out, the memory pro-
cess is complete.
...............................................................................................
Memory tuning
Select a preset station with the Preset Station buttons (∧/∨).
24