Sears 917.257651 owner manual Other, Battery, Fuel System, Engine OIL, Cylinders

Page 24

....

=

= B

=

__

STORAGE

Immediately prepare your tractor for'storage at the end of

the season or if the tractor wilt not be used for 30 days or more

ml ,ill

CAUTION: Never store the tractor with

gasoline in the tank inside a building where fumes may reach an open flame or spark, Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage° When mower is to be stored for a period of time, clean it thor- oughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

oClean entire tractor (See"CLEAN ING" in the Customer Responsibilities section of this manual).

oInspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Customer Responsibilities section of this manual..

oBe sure that all nuts, bolts and screws are securely fastened Inspect moving parts for damage, breakage and wear_ Replace if necessary°

. Touch up all rusted or chipped paint surfaces; sand lightly before painting..

BATTERY

•Fully charge the battery for storage.

oAfter a period of time in storage, battery may require recharging..

=To help prevent corrosion and power leakage during tong periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the Cus- tomer Responsibilities section of this manual).

=After'cleaning, leave cables disconnected and place

cables where they cannot come in contact with battery terminals.

°Be sure battery drain tube is securely attached.

=If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT iS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER,

FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED

FUELS (CALLED GASOHOL OR USING ETHANOL OR

METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING

STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE tN STORAGE

o Drain the fuel tank

°Start the engine and tet it run until the fuel lines and carburetor are empty

oNever use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

o Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during stor- age. Add stabilizer to gasoline in fue! tank or storage container. Always follow the mix ratio found on stabilizer

container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do

not drain the gas tank and carburetor if using fuel stabilizer

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Customer Responsibilities section of this manual).

CYLINDERS

•Remove spark plug(s).

°Pour one ounce of oi! through spark plug hole(s) into cylinder(s).

oTurn ignition key to"START" position for a few seconds to distribute oil..

o Replace with new spark plug(s).

OTHER

°Do not store gasoline from one season to another.

oReplace your'gasoline can if your can starts to rust° Rust and/or dirt in your gasoline will cause problems.

oIf possible, store your'tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and

will cause your tractor to rust,

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model Safety Rules Safe Operation Practices for Ride-On MowersMaintenance Agreement Limited 90 DAY Warranty on BatteryCustomer Responsibimties Contents Aooessor Esand Attach Ents EnginePerformance Parts Bag contents shown full size Parts bag contents not shown full sizeAssembly Tools REQU1RED for AssemblyTo Remove Tractor from Carton Before Rolling Tractor OFF SkidHOW to SET UP Your Tractor Prepare Battery See FigInstall Seat See Fig Check for Proper Position of ALL BeltsInstall Battery See Figs UULVentcaps Assemble Gauge Wheels to Mower Deck See FigINSTALL Mulcher Plate See Figs.7A & 7B To Convert to Bagging or DischargingOperation Know Your TractorOperatnon To SET Parking Brake See FigSee Fig Before Starting the Engine To Operate Mower See FigTo Operate On Hills Check Engine OIL Level See FigTrash Clean After Each USE OiperatjonMowing T PS To Start Engine See FigFill in Dates Regular Service Service DatesCustome Espon Uties Before Each USECusto Responswb L T ES TractorBrake Operation TiresEngine AIR Filter See FigTransaxle Cooling LubricationCleaning Clean AIR INTAKE/COOLING AreasMuffler Spark PlugsTo Install Mower See Fig To Remove Mower See FigServmce and Adjustments To Level Mower HousingService AN Adjustments To Adjust Brake See FigTo Replace Mower Blade Drive Belt See Fig Serwce and Adjustments To Adjust Throttle Control Cable See Fig To Adjust Carburetor See FigPreliminary Setting Final SettingBattery OtherFuel System Engine OILTrouibleshoot NG Points Cause CorrectionTroubleshooting PO NTSSchematic

917.257651 specifications

The Sears 917.257651 is a riding lawn mower that has gained a reputation for its reliability and efficiency in lawn care. Designed as a versatile solution for both small and medium-sized yards, this mower combines power and ease of use, making it a popular choice among homeowners.

One of the standout features of the Sears 917.257651 is its robust engine. It typically comes equipped with a powerful 17.5 HP Briggs & Stratton engine, which provides ample torque and performance to tackle various mowing conditions. This engine is designed to be fuel-efficient, allowing homeowners to cover more ground without frequent refueling.

The mower utilizes a 42-inch cutting deck, which strikes an excellent balance between maneuverability and cutting width. This size is particularly advantageous for navigating around trees, flower beds, and other obstacles typically found in residential landscapes. The cutting deck also features multiple height adjustments, enabling users to customize their mowing height to achieve the desired lawn appearance.

Ergonomics play a crucial role in the design of the Sears 917.257651. The operator's seat is designed for comfort, featuring ample padding and adjustable settings to accommodate various user preferences. Additionally, the model incorporates a user-friendly steering wheel that enhances maneuverability, making it easy to navigate tight corners.

The mower is equipped with a hydrostatic transmission, which allows for smooth speed adjustments without the need for manual shifting. This feature provides intuitive control, enabling the operator to focus on mowing without worrying about gear changes.

The Sears 917.257651 also includes a range of safety features, such as a seat switch that ensures the mower will not operate if the driver leaves the seat. This helps prevent accidents and enhances overall safety during operation.

With its combination of powerful performance, ergonomic design, and user-friendly features, the Sears 917.257651 stands out as a reliable choice for homeowners seeking to maintain their lawns efficiently. Whether tackling overgrown grass or performing regular lawn maintenance, this riding mower offers the strength and flexibility necessary to get the job done right. Its enduring popularity in the market is a testament to its build quality, technological innovation, and user-centered design.
Top Page Image Contents