McCulloch 966582001, ZM3816 BF manual Safe Handling of Gasoline

Page 13

SAFETY

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

•Never fuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliance.

•Before beginning to refuel, minimize the risk of static electricity by touching a metal surface.

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from the vehicle when filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in fuel system, engine must not be started until problem has been resolved.

•Check the fuel level before each use and leave space for the fuel to expand, as the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system become very hot during operation.

There is risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Parking Brake Ignition SwitchThrottle Control Refueling Choke ControlMower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportManual Transport Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceMaintenance To clean battery and terminals BatteryAlways use protective glasses when handling the battery Tire Pressures Safety SystemDeck Belt BeltsTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckRemoval and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LubricationFront Wheel Bearings Front Wheel MountEngine Lubrication Steering Control ShaftsProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceWiring Diagram Torque Specifications Technical DataStandard Hardware Transmission ZM3816 BF EngineZM3816 BF Equipment Overall dimensionsProductivity CE requirements USA requirementsDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 10 Hours Hour ServiceService Journal At Least Once Each Year Page 115 359527R1 03/05/10

966582001, ZM3816 BF specifications

The McCulloch ZM3816 BF is a robust and versatile brushcutter designed for both professional and DIY users who require efficient performance for maintaining gardens, yards, and larger green spaces. Known for its reliability, the ZM3816 BF combines power with user-friendly features, making it an essential tool for tackling tough cutting tasks.

At the heart of the ZM3816 BF is a powerful 38cc 2-stroke engine, which delivers impressive performance while ensuring ease of use. The engine is designed to provide a high torque output, allowing for effective cutting through dense underbrush and grass. Additionally, the lightweight construction minimizes user fatigue, making it ideal for extended periods of operation.

One of the standout features of the ZM3816 BF is its innovative SmartStart technology, which significantly reduces the effort required to start the engine. This feature minimizes resistance in the starter cord, allowing for quicker and easier starting – a real advantage for users who may need to frequently start and stop during their tasks.

The brushcutter is equipped with a robust cutting system that includes a dual-line trimmer head and an optional metal blade, providing versatility for various cutting conditions. The dual-line system effectively tackles grass and light weeds, while the metal blade can handle tougher vegetation and thicker underbrush, making it suitable for various landscaping needs.

Ergonomics play a vital role in the design of the ZM3816 BF. The trimmer features an adjustable handle and harness, ensuring a comfortable fit for users of all sizes. This adaptability enhances control during operation, allowing for precise maneuverability around flower beds and garden edges.

Another notable characteristic of the McCulloch ZM3816 BF is its low vibration design, which helps to minimize user fatigue and improves comfort over extended use. This is crucial for professionals and regular users who spend considerable time operating the brushcutter.

In terms of maintenance, the ZM3816 BF is designed for simplicity, allowing users to easily access and service the engine components. Overall, the McCulloch ZM3816 BF brushcutter delivers a combination of power, efficiency, and user-centric design, making it a preferred choice for tackling a variety of cutting and trimming tasks in gardens and landscapes.
Top Page Image Contents