McCulloch 966582001, ZM3816 BF manual Belts, Deck Belt, To replace deck belt

Page 37

MAINTENANCE

Parking Brake

Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action.

To adjust the parking brake, contact the McCulloch service workshop.

WARNING!

Faulty adjustment can result in reduced braking ability and can cause an accident.

V-belts

Check every 100 hours of operation. Check for severe cracking and large nicks.

NOTE: The belt will show some small cracks in normal operation.

The belts are not adjustable. Replace belts if they begin to slip from wear.

Deck Belt

To replace deck belt

Deck belt removal.

1.Park on a level surface. Apply park brake.

2.Lower the deck to the lowest cutting position.

3.Disengage the clutch by sliding the blade control lever downwards.

4.Carefully lift the belt away from belt keepers and off deck pulleys and remove from deck.

5.Replace belt (refer to the belt routing decal on the deck) and re-engage clutch.

8050-005

Check for proper operation of parking brake

8058-074

Disengage clutch to replace deck belt

8050-013

Check deck belt for excessive wear

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Parking Brake Ignition SwitchThrottle Control Refueling Choke ControlMower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportManual Transport Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceMaintenance To clean battery and terminals BatteryAlways use protective glasses when handling the battery Tire Pressures Safety SystemDeck Belt BeltsTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckRemoval and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LubricationFront Wheel Bearings Front Wheel MountEngine Lubrication Steering Control ShaftsProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceWiring Diagram Torque Specifications Technical DataStandard Hardware Transmission ZM3816 BF EngineZM3816 BF Equipment Overall dimensionsProductivity CE requirements USA requirementsDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 10 Hours Hour ServiceService Journal At Least Once Each Year Page 115 359527R1 03/05/10

966582001, ZM3816 BF specifications

The McCulloch ZM3816 BF is a robust and versatile brushcutter designed for both professional and DIY users who require efficient performance for maintaining gardens, yards, and larger green spaces. Known for its reliability, the ZM3816 BF combines power with user-friendly features, making it an essential tool for tackling tough cutting tasks.

At the heart of the ZM3816 BF is a powerful 38cc 2-stroke engine, which delivers impressive performance while ensuring ease of use. The engine is designed to provide a high torque output, allowing for effective cutting through dense underbrush and grass. Additionally, the lightweight construction minimizes user fatigue, making it ideal for extended periods of operation.

One of the standout features of the ZM3816 BF is its innovative SmartStart technology, which significantly reduces the effort required to start the engine. This feature minimizes resistance in the starter cord, allowing for quicker and easier starting – a real advantage for users who may need to frequently start and stop during their tasks.

The brushcutter is equipped with a robust cutting system that includes a dual-line trimmer head and an optional metal blade, providing versatility for various cutting conditions. The dual-line system effectively tackles grass and light weeds, while the metal blade can handle tougher vegetation and thicker underbrush, making it suitable for various landscaping needs.

Ergonomics play a vital role in the design of the ZM3816 BF. The trimmer features an adjustable handle and harness, ensuring a comfortable fit for users of all sizes. This adaptability enhances control during operation, allowing for precise maneuverability around flower beds and garden edges.

Another notable characteristic of the McCulloch ZM3816 BF is its low vibration design, which helps to minimize user fatigue and improves comfort over extended use. This is crucial for professionals and regular users who spend considerable time operating the brushcutter.

In terms of maintenance, the ZM3816 BF is designed for simplicity, allowing users to easily access and service the engine components. Overall, the McCulloch ZM3816 BF brushcutter delivers a combination of power, efficiency, and user-centric design, making it a preferred choice for tackling a variety of cutting and trimming tasks in gardens and landscapes.
Top Page Image Contents