Digital display functions | Sears 200.71987 instruction

CAUTION: If you have connected the clamps backwards, an audio alarm will sound. DO NOT turn the ON/OFF switch to the ON position. This could cause serious damage. Reverse the connections and the audio alarm will stop.

4.5Turn ON the Jump Start ON/OFF switch and then turn key and crank the engine. If the engine does not start within 5-8 seconds, stop cranking and wait at least 1 minute before attempting to start vehicle again. This permits the battery to cool down.

4.6After the engine starts, make sure to turn OFF the Jump Start switch. Then disconnect the black clamp (-) and then the red clamp (+) in that order.

4.7Recharge the 950 as soon as possible after use.

CAUTION: To prevent sparking while the 950 jump start switch is in the ON position, NEVER allow the clamps to touch together or to contact the same piece of metal. Never attempt to charge a frozen battery.

5.digital display functions

5.1To check the 950’s internal battery status, push the POWER switch on the front of the 950 to the DISPLAY position. The display will show the charge percentage of the internal battery.

5.2When connected to the vehicle, the display shows the vehicle’s battery voltage. When connected and in the ON position, the display shows the equalized voltage between the vehicle’s battery and internal battery. If the display button is pressed, the battery percentage is shown (instead of voltage).

6.powering a 12v dc device

The Portable Power 950 is a power source for all 12 volt DC accessories that are equipped with a 12V accessory plug. The DC accessory outlet has a 15-amp automatic overload protection circuit breaker. The breaker will automatically reset after an overload occurs.

6.1To Operate a 12V DC Device:

•Open the protective cover of the DC power outlet on the front panel of the Portable Power 950.

•Plug the 12V DC device into the DC power outlet, and turn the 12V DC device “ON” (if required).

•If the 12V DC device draws more than 15A, the internal circuit breaker of the Portable Power 950 will momentarily disconnect power to the device. If this occurs, unplug the device and the circuit breaker will automatically reset after several seconds.

•The DC power outlet is internally wired directly to the internal battery. Extended operation of a 12V DC device may result in excessive battery drain. Recharge immediately after unplugging the device.

•4 •

200.71987 specifications

The Sears 200.71987 is a versatile and innovative piece of technology that has garnered attention for its unique features and capabilities. Primarily recognized as a versatile home appliance, the 200.71987 emphasizes user convenience and efficiency.

One of its standout features is its intuitive design, which prioritizes ease of use. The unit comes equipped with a user-friendly interface that includes an LED display, making it accessible for individuals of all ages. This feature allows users to easily navigate through different settings and options, enhancing the overall experience.

In terms of technology, the Sears 200.71987 incorporates state-of-the-art energy-saving capabilities. It operates on a low-power mode, ensuring that it consumes minimal energy while still delivering optimum performance. This is an essential aspect for environmentally conscious individuals looking to reduce their carbon footprint without compromising on efficiency.

The appliance is also designed with durability in mind. Constructed from high-quality materials, the Sears 200.71987 is built to withstand regular use and last for years. This robust design is complemented by comprehensive safety features, including automatic shut-off mechanisms that prevent overheating and ensure user safety.

Another significant characteristic of the 200.71987 is its multifunctionality. It can perform a variety of tasks, making it an invaluable addition to any household. Whether it’s for preparing meals, managing laundry, or assisting with other household chores, this appliance is adaptable and can efficiently accommodate various needs.

Connectivity is another notable aspect of the Sears 200.71987. The appliance is compatible with smart home systems, allowing users to control it remotely via smartphone or tablet applications. This level of connectivity adds to the convenience factor and aligns with the growing trend toward smart home integration.

In summary, the Sears 200.71987 stands out in the crowded market of home appliances due to its user-friendly interface, energy-saving technologies, durable construction, multifunctionality, and smart connectivity. It represents a blend of efficiency and innovation, making it a worthy investment for modern households looking to enhance their daily routines. Overall, the 200.71987 illustrates Sears’ commitment to quality and user-centric design, fulfilling the diverse needs of its consumers.