McCulloch MC12527ES owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 10

OPERATION

TO THROW SNOW (See Fig. 13)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 15)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 15

FIG. 14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MC12527ES Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Electric start button used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Scraper BAR See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Wheels See Fig Engine SpeedFuel System StorageOther Engine OILTroubleshooting Exploded KEY Part Description Auger 27 LH Scraper BARAuger 27 RH Carriage Bolt 5/16− Knob Black 532 18 45-11 Deflector WeldmentStrap POP RivetCable Assembly Heat Shield 532 42 82-72 LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator Pivot BracketRepair Parts Snow Thrower - Model Number MC12527ES Handles 532 44 36-17 Pivot Support WeldmentKnob RED SpacerRetainer Handle KnobShifter ROD TOP Impeller RODTraction ROD 532 18 77-16 Shifter ROD BottomBulb 532 41 62-88 Interlock SpringRepair Parts Snow Thrower - Model Number MC12527ES Drive Wheel HUB Speed Selector AssemblyRetainer 532 40 26-89 Drive Plate Assembly END PlateRoll PIN 3/16 AssemblyAxle Shaft SprocketFrame 532 42 86-85 Cover Assembly532 43 62-63 Complete LCT Engine KEY Part Description 532 42 92-69 Engine Mounting PlateIdler ARM Bracket Impeller BeltTraction Belt Idler Pulley 532 42 59-34 Pulley ENG ImpellerRepair Parts Snow Thrower - Model Number MC12527ES Wheels Wheel Assembly LHKEY Part Description 532 44 30-59 Safety Ignition KEY KIT Power CordWrench DECAL, CON RT SPD/LEV/PWST 532 18 10-37 DECAL, Danger532 18 10-35 DECAL, DANGER, Deflector DECAL, CON LT WD/DEFService Notes Service Notes Limited Warranty

MC12527ES specifications

The McCulloch MC12527ES is a versatile and powerful chainsaw, designed for homeowners and professionals who require durability and efficiency for a variety of cutting tasks. This model is a perfect companion for pruning, cutting firewood, or even felling small trees.

One of the most notable features of the MC12527ES is its 27cc, 2-stroke engine. This engine delivers ample power for most cutting jobs while remaining lightweight and easy to handle. Its efficient engine design ensures that users can work longer without experiencing excessive fatigue, making it ideal for extended periods of use. Additionally, the chainsaw comes equipped with an easy-start system, which significantly reduces the effort required to start the motor. This feature is particularly useful for users who may struggle with traditional pull-start mechanisms.

The McCulloch MC12527ES also boasts a 12-inch bar and chain, which provides a perfect balance between cutting capacity and maneuverability. The length is suitable for a variety of tasks, allowing users to easily navigate through branches and limbs with precision. The chainsaw also features an automatic oil pump, which ensures that the chain remains well-lubricated during operation, promoting longer chain life and reducing wear and tear.

Safety is a priority in the design of the MC12527ES. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, protecting the user from potential injuries. This safety feature, along with an ergonomic handle, enhances user control and comfort during operation, making it an excellent choice for both beginners and experienced operators alike.

Another highlight of the McCulloch MC12527ES is its compact design. Weighing just around 10 pounds, this chainsaw is not only lightweight but also easy to transport and store. The saw features a tool-less chain tensioning system, allowing quick and easy adjustments on the go without the need for additional tools, which adds to its user-friendly nature.

Durable construction ensures that the MC12527ES can withstand the rigors of regular use. The high-quality materials used in its design mean that the chainsaw can handle tough cutting tasks without compromising performance. In essence, the McCulloch MC12527ES is a reliable and effective chainsaw that combines innovation, safety, and ease of use, making it a valuable investment for anyone looking to tackle outdoor cutting jobs with confidence.
Top Page Image Contents