McCulloch MC12527ES owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

1.Retrieve vinyl sleeve and spring from bag of parts and retrieve the auger control rod from carton chute tray. Slide straight rod end through the small hole in the vinyl sleeve. Hook spring in hole in rod end.

2.Hook end of spring into control arm with loop opening up as shown. (See Fig. 5)

3.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

VINYL

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotatechute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MC12527ES Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Electric start button used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Scraper BAR See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Wheels See Fig Engine SpeedFuel System StorageOther Engine OILTroubleshooting Exploded KEY Part Description Scraper BAR Auger 27 LHAuger 27 RH Carriage Bolt 5/16− Knob Black 532 18 45-11 Deflector WeldmentStrap POP RivetCable Assembly Heat Shield 532 42 82-72 LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator Pivot BracketRepair Parts Snow Thrower - Model Number MC12527ES Handles 532 44 36-17 Pivot Support WeldmentKnob RED SpacerRetainer Handle KnobShifter ROD TOP Impeller RODTraction ROD 532 18 77-16 Shifter ROD BottomBulb 532 41 62-88 Interlock SpringRepair Parts Snow Thrower - Model Number MC12527ES Drive Wheel HUB Speed Selector AssemblyRetainer 532 40 26-89 Drive Plate Assembly END PlateRoll PIN 3/16 AssemblyAxle Shaft SprocketFrame 532 42 86-85 Cover Assembly532 43 62-63 Complete LCT Engine KEY Part Description 532 42 92-69 Engine Mounting PlateIdler ARM Bracket Impeller BeltTraction Belt Idler Pulley 532 42 59-34 Pulley ENG ImpellerRepair Parts Snow Thrower - Model Number MC12527ES Wheels Wheel Assembly LHPower Cord KEY Part Description 532 44 30-59 Safety Ignition KEY KITWrench DECAL, CON RT SPD/LEV/PWST 532 18 10-37 DECAL, Danger532 18 10-35 DECAL, DANGER, Deflector DECAL, CON LT WD/DEFService Notes Service Notes Limited Warranty

MC12527ES specifications

The McCulloch MC12527ES is a versatile and powerful chainsaw, designed for homeowners and professionals who require durability and efficiency for a variety of cutting tasks. This model is a perfect companion for pruning, cutting firewood, or even felling small trees.

One of the most notable features of the MC12527ES is its 27cc, 2-stroke engine. This engine delivers ample power for most cutting jobs while remaining lightweight and easy to handle. Its efficient engine design ensures that users can work longer without experiencing excessive fatigue, making it ideal for extended periods of use. Additionally, the chainsaw comes equipped with an easy-start system, which significantly reduces the effort required to start the motor. This feature is particularly useful for users who may struggle with traditional pull-start mechanisms.

The McCulloch MC12527ES also boasts a 12-inch bar and chain, which provides a perfect balance between cutting capacity and maneuverability. The length is suitable for a variety of tasks, allowing users to easily navigate through branches and limbs with precision. The chainsaw also features an automatic oil pump, which ensures that the chain remains well-lubricated during operation, promoting longer chain life and reducing wear and tear.

Safety is a priority in the design of the MC12527ES. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, protecting the user from potential injuries. This safety feature, along with an ergonomic handle, enhances user control and comfort during operation, making it an excellent choice for both beginners and experienced operators alike.

Another highlight of the McCulloch MC12527ES is its compact design. Weighing just around 10 pounds, this chainsaw is not only lightweight but also easy to transport and store. The saw features a tool-less chain tensioning system, allowing quick and easy adjustments on the go without the need for additional tools, which adds to its user-friendly nature.

Durable construction ensures that the MC12527ES can withstand the rigors of regular use. The high-quality materials used in its design mean that the chainsaw can handle tough cutting tasks without compromising performance. In essence, the McCulloch MC12527ES is a reliable and effective chainsaw that combines innovation, safety, and ease of use, making it a valuable investment for anyone looking to tackle outdoor cutting jobs with confidence.
Top Page Image Contents