McCulloch MC17542ST manual To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 21

SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 22

TO CHECK AND ADJUST BRAKE (See Fig. 23)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 23

TO REPLACE MOTION DRIVE BELT (See Fig. 24)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model NO. MC17542ST MC17542STA 17.5 HP 42 Inch Lawn Tractor Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Contents of Hardware Pack Tools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidConnect Battery See Figs Check Tire Pressure To Convert to Bagging or DischargingCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig To Adjust Gauge Wheels See FigTo Operate on Hills To TransportCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigMulching Mowing Tips Mowing TipsLubrication Chart MaintenanceGeneral Recommendations Before Each USETractor Engine Clean AIR INTAKE/COOLING Areas CleaningMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig Belt Installation To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Brake To Check and Adjust Brake See FigTo Replace Motion Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor Interlocks and RelaysOther StorageFuel System Engine OILTroubleshooting Points With attachment clutch Schematic Repair PartsElectrical KEY Part Description Chassis and Enclosures 532 17 46-19 Chassis Stamping 116 DriveRepair Parts Steering Assembly Repair Parts KEY Part NO. no Description Seat AssemblyWheels & Tires DecalsOptional Equipment EngineNO. NO. Description Mower LiftMower Deck KEY Part Description Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

MC17542STA, MC17542ST specifications

The McCulloch MC17542ST and MC17542STA lawn mowers are distinguished machines designed for homeowners seeking a reliable and efficient solution for lawn maintenance. These models combine powerful performance with user-friendly features, making them an excellent choice for small to medium-sized lawns.

One of the key features of the MC17542ST and its counterpart, the MC17542STA, is their robust 420cc engine, which provides ample power to tackle various types of grass and terrain. The engine is equipped with advanced technology that ensures reliable starting and efficient fuel consumption, contributing to reduced emissions and lower operational costs. This powerful engine allows users to maintain productivity without the frequent interruptions associated with refueling.

Both models are equipped with a 42-inch cutting deck, which enables wider cutting swath and enhances mowing efficiency. The cutting deck is made of durable materials, ensuring longevity and resistance to wear. Furthermore, the deck height can be easily adjusted, allowing users to achieve their desired grass height with a simple lever adjustment. This feature is particularly beneficial for maintaining a healthy lawn, catering to different grass types and seasonal growth patterns.

The MC17542ST and MC17542STA mowers also feature a comfortable and ergonomic design. The adjustable seat ensures that operators can find their ideal driving position, enhancing comfort during extended mowing sessions. The user-friendly controls are positioned intuitively for easy access, allowing for seamless operation even for those who are new to lawn care.

Another notable characteristic of these models is their zero-turn capability, making it easier to maneuver around obstacles such as trees, flower beds, and garden ornaments. This feature significantly reduces the time spent mowing, as operators can turn with precision and navigate tight spaces effortlessly.

Safety is paramount with the McCulloch MC17542ST and MC17542STA models. They come equipped with safety features such as blade brake systems that stop the blades almost instantly when the operator releases the control. This ensures peace of mind during operation and enhances overall user safety.

In conclusion, the McCulloch MC17542ST and MC17542STA mowers offer an impressive blend of power, efficiency, comfort, and safety. With their powerful engines, wide cutting deck, user-friendly design, and zero-turn capability, they stand out as excellent choices for anyone looking to maintain a beautiful lawn with minimal effort. Whether you're a seasoned gardener or a first-time mower, these models are designed to meet your needs effectively.
Top Page Image Contents