McCulloch MC17542STA manual Tools Required for Assembly, To Remove Tractor from Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(2)

7/16" wrenches

Utility knife

(2)

3/4" wrench

Tire pressure gauge

Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

INSERT

1/2 HEX NUT

LARGE FLAT WASHER

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

Remove all accessible loose parts and parts cartons

 

from carton.

Cut along dotted lines on all four panels of carton.

STEERING WHEEL

STEERING BOOT

TABS

Remove end panels and lay side panels flat.

• Check for any additional loose parts or cartons and

remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

Slide extension shaft onto lower steering shaft. Align mounting holes in extension and lower shafts and install 1/4 hex bolt and locknut. Tighten securely.

IMPORTANT: TIGHTEN BOLT AND NUT SECURELY TO 10-12 FT. LBS TORQUE.

Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

Position front wheels of the tractor so they are pointing straight forward.

Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

Assemble large flat washer, 1/2 hex nut and tighten securely.

Snap steering wheel insert into center of steering wheel.

Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKIDTHAT MAY PUNCTURETIRESWHERETRACTOR IS TO ROLL OFF SKID.

ADAPTER

EXTENSION SHAFT

1/4 HEX BOLT

1/4 LOCKNUT

LOWER

STEERING

SHAFT

TAB

SLOTS

FIG. 1

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment knob.

Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolts are positioned over the large slotted holes in pan.

Push down on seat to engage shoulder bolts in slots and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

Lower seat into operating position and sit in seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment knob securely.

6

Image 6
Contents Model NO. MC17542ST MC17542STA 17.5 HP 42 Inch Lawn Tractor General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidConnect Battery See Figs Check Deck Levelness To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Adjust Gauge Wheels See FigTo Operate Mower See Fig To TransportADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Mulching Mowing TipsGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Engine Muffler CleaningClean AIR INTAKE/COOLING Areas Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTo Adjust Brake To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Remove Wheel for Repairs See FigTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control Interlocks and RelaysFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Repair Parts SchematicElectrical KEY Part Description Chassis and Enclosures 532 17 46-19 Chassis Stamping Drive 116Repair Parts Steering Assembly Repair Parts Seat Assembly KEY Part NO. no DescriptionDecals Wheels & TiresEngine Optional EquipmentMower Lift NO. NO. DescriptionMower Deck KEY Part Description Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

MC17542STA, MC17542ST specifications

The McCulloch MC17542ST and MC17542STA lawn mowers are distinguished machines designed for homeowners seeking a reliable and efficient solution for lawn maintenance. These models combine powerful performance with user-friendly features, making them an excellent choice for small to medium-sized lawns.

One of the key features of the MC17542ST and its counterpart, the MC17542STA, is their robust 420cc engine, which provides ample power to tackle various types of grass and terrain. The engine is equipped with advanced technology that ensures reliable starting and efficient fuel consumption, contributing to reduced emissions and lower operational costs. This powerful engine allows users to maintain productivity without the frequent interruptions associated with refueling.

Both models are equipped with a 42-inch cutting deck, which enables wider cutting swath and enhances mowing efficiency. The cutting deck is made of durable materials, ensuring longevity and resistance to wear. Furthermore, the deck height can be easily adjusted, allowing users to achieve their desired grass height with a simple lever adjustment. This feature is particularly beneficial for maintaining a healthy lawn, catering to different grass types and seasonal growth patterns.

The MC17542ST and MC17542STA mowers also feature a comfortable and ergonomic design. The adjustable seat ensures that operators can find their ideal driving position, enhancing comfort during extended mowing sessions. The user-friendly controls are positioned intuitively for easy access, allowing for seamless operation even for those who are new to lawn care.

Another notable characteristic of these models is their zero-turn capability, making it easier to maneuver around obstacles such as trees, flower beds, and garden ornaments. This feature significantly reduces the time spent mowing, as operators can turn with precision and navigate tight spaces effortlessly.

Safety is paramount with the McCulloch MC17542ST and MC17542STA models. They come equipped with safety features such as blade brake systems that stop the blades almost instantly when the operator releases the control. This ensures peace of mind during operation and enhances overall user safety.

In conclusion, the McCulloch MC17542ST and MC17542STA mowers offer an impressive blend of power, efficiency, comfort, and safety. With their powerful engines, wide cutting deck, user-friendly design, and zero-turn capability, they stand out as excellent choices for anyone looking to maintain a beautiful lawn with minimal effort. Whether you're a seasoned gardener or a first-time mower, these models are designed to meet your needs effectively.