Specifications
| SA9500 | SA5500 | SA3000 |
Frequency response |
|
|
|
(8 ohms , 20Hz - 20kHz @ 1 W) | +0, | +0, | +0, |
Total harmonic distortion | 0.1% | 0.1% | 0.1% |
Signal to noise ratio | 102dB | 102dB | 102dB |
Slew rate | 20V/uS | 20V/uS | 20V/uS |
Damping factor | >200 | >200 | >200 |
Crosstalk | 80dB | 80dB | 80dB |
Rated power |
|
|
|
(per channel RMS Watts, both channels driven) |
|
|
|
2 ohms,1kHz,1% THD | 1000W | 550W | 300W |
4 ohms, 1kHz, 1%THD | 650W | 480W | 240W |
8 ohms,1kHz,1% THD | 400W | 270W | 150W |
(bridged mono operation) |
|
|
|
4 ohms,1kHz,1% THD | 2000W | 1100W | 540W |
8 ohms,1kHz,1% THD | 1300W | 850W | 420W |
Input sensitivity |
|
|
|
8 ohms, 1kHz @ rated power | 1.22 V RMS | 1.22 V RMS | 1.22 V RMS |
fixed voltage gain | 34dB | 31dB | 28dB |
Input impedance |
|
|
|
unbalanced (inverting polarity) @ 1kHz | 10k ohms | 10k ohms | 10k ohms |
balanced @ 1kHz | 20k ohms | 20k ohms | 20k ohms |
Protection circuits |
|
|
|
load short protection | 1.0 ohms | 1.0 ohms | 1.0 ohms |
load short: current limit | 4.5 A | 4.5 A | 4.5 A |
Power consumption | 1050W | 750W | 400W |
Power requirements | 115V / 60Hz, 220V / 50Hz, | 240V / 50Hz | (depending on country) |
Residual noise 8 ohms, volume at min. | 0.4mV | 0.4mV | 0.4mV |
Intermodulation distortion 8 ohms, 1kHz @ 1W | 0.1% | 0.1% | 0.1% |
Dimensions |
|
|
|
mm | 480 x 132 x 435 | 480 x 87 x 435 | 480 x 87 x 435 |
inches | 19 x 17 5/8 x 5 1/4 | 19 x 17 7/16 x3 1/2 | 19 x 17 7/16 x 3 1/2 |
Weight |
|
|
|
Net kgs (lbs) | 18.5 (40) | 14.4 (33) | 12.5 (27.5) |
Gross kgs (lbs) | 20 (44) | 17 (35.2) | 15 (29.7) |
E & OE. Due to continual product development, all features and specifications subject to change without notice.
©1997 Numark Industries | 14 | http://www.numark.com |