Sears 917.37283 manual Customer Responsibilities, Grass Catcher, Drive Wheels, Gear Case

Page 13

CUSTOMER RESPONSIBILITIES

LAWN MOWER

Always observe safety rules when performing any mainte- nance.

TIRES

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

BLADE CARE

For best results, mower blade must be kept sharp. Replace bent or damaged blades.

TO REMOVE BLADE (See Fig. 11)

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

Turn lawn mower on its side. Make sure air filter and carburetor are up.

Use a wood block between blade and mower housing

to prevent blade from turning when removing blade bolt.

Protect your hands with gloves and/or wrap blade with heavy cloth.

Remove blade bolt by turning counter-clockwise. Use a 9/16" box or open-end wrench.

Remove blade and attaching hardware (bolt, lock washer and hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE (See Fig. 11)

Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are afigned.

Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine.

Install the blade bolt with the Iockwasher and hardened washer into blade adapter and crankshaft.

•Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. lbs. IMPORTANT: BLADE BOLT iS GRADE8 HEATTREATED.

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

TO SHARPEN BLADE

Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, drive a nail into a beam orwall.

Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

13

BLADECRAN_

KEYWAY

BLADE

'DRANK=

 

 

 

SHAFT

I

WASHERHARDENED

\

 

 

 

TRAJUNG

 

LOCK WASHER

EDGE

BLADE ADAPTER

 

 

 

FiG. 1!

GRASS CATCHER

(!f purchased as an accessory)

The grass catcher may be hosed with water, but must be dry when used.

Check your grass catcher often for damage or deterio- ration. Through normal use it will wear. if catcher needs replacing, replace onty with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering.

DRIVE WHEELS

Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheets,

If necessary to clean the drive wheels, check both front wheels.

Remove hubcaps, hairpin cotters and washers.

Remove wheels from wheet adjusters,

Remove any trash or grass cuttings from inside the dust cover, pinion and/or drive wheel gear teeth.

Put wheels back in place.

If after cleaning, the drive wheeIs do not turn freely, contact your nearest authorized service center.

GEAR CASE

=To keep your drive system working properly, the gear case and area around the drive should be kept clean

and free of trash build-up. Clean under the drive cover twice a season.

The gear case is filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

If lubricant is required, use only Texaco Starplex Pre- mium 1 Grease, Part No. 750369. Do not substitute.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Rill rSMnN Training Maintenance and StoragePreparation OperationLimited TWO Year Warranty on Craftsman Power Mower Maintenance AgreementCustomer Responsibilities Table of Contents Mowers Lawn Mower Maintenance Replacement Optional BAG for Rear Catcher For DischargeEngine Lawn Mower PerformanceTo Remove Lawn Mower from Carton Howto SET Upyour Lawn MowerTo Unfold Handle See Fig Catcher See Figs a thru 4C To Assemble and Attach GrassOperation Meets Cpsc Safety RequirementsHowto Useyour Lawn Mower OperaticEngine Speed See Fig Engine Zone ControlTo Start Engine Before Starting EngineMowing Tips GAS See FigResponsibilities Section of this Manual Mulching Mowing TipsYservice Dates Fill in Dates AS YOU Complete Regular ServiceCustomer Respo General RecommendationsGrass Catcher Customer ResponsibilitiesDrive Wheels Gear CaseClean Under Drive Cover CleaningMuffler LubricationTo REMOVE/REPLACE Drive Belt Rear DeflectorSee Fig. t4 Carburetor Engxne SpeedOther StorageHandle See Fig Fuel SystemService Notes TROUBLESHOOT! Points Problem Cause CorrectionRotary Lawn Mower Model Number Description KEY Part NO. noKEY Part Descrption NO, no Rotary Lawn Mower Model Number 9t7o372830 Part KEYKEY Part Description Gear Case Assembly Part NumberKEY Part Msbel and Serial Numbers Here Craftsman 4--CYCLE EnginePart Description Craftsman 4-CYCLE EngineRewind Starter no Part Carburetor no Rewind Starter noPRODUCT- Lawn Mower Ifyou Need Repair Service or PartsPart Number

917.37283 specifications

The Sears 917.37283 is a versatile lawn mower renowned for its reliability and impressive performance. Designed for homeowners and gardening enthusiasts alike, this mower seamlessly blends power and efficiency, making it a popular choice for maintaining a well-manicured lawn.

One of the notable features of the Sears 917.37283 is its robust engine. Powered by a reliable gas engine, it delivers the torque needed to tackle various types of grass and terrain. This means users can expect consistent cutting performance, whether mowing through thick grass or dealing with uneven surfaces. The engine’s design also focuses on fuel efficiency, allowing for longer mowing sessions between refuels.

The mower features a cutting width of typically 21 inches, providing a balance between maneuverability and efficiency. This size enables users to cut through larger areas in fewer passes compared to smaller models, without sacrificing the ability to navigate tighter spaces. Additionally, many models in this series offer adjustable cutting heights, allowing users to customize the length of their grass according to their preferences or seasonal requirements.

Another significant characteristic of the Sears 917.37283 is its ease of use. Equipped with a user-friendly starting mechanism, this mower often features an easy-to-pull recoil starter, reducing the effort needed to get the mower running. The ergonomic handle design adds to the comfort, allowing for better control and reduced fatigue during prolonged use.

Safety features are also integral to the design. The mower is equipped with safety mechanisms, including blade brakes that stop the blades when the user releases the control handle, ensuring protection against accidental injuries. The durable construction of the mower adds to its longevity, with materials designed to withstand the rigors of everyday use, including resistance to rust and corrosion.

Maintenance is straightforward, with an accessible air filter and easy-to-reach spark plugs, which simplifies routine care tasks. Some models provide the option for mulching capabilities, allowing grass clippings to be finely chopped and returned to the lawn, promoting healthy growth and reducing yard waste.

In summary, the Sears 917.37283 lawn mower is a solid choice for homeowners seeking a dependable and efficient mowing solution. With its powerful engine, adjustable cutting features, user-friendly design, and safety measures, it caters to diverse lawn care needs, making it an excellent addition to any gardening toolkit.
Top Page Image Contents