Sears 917.37283 manual To Remove Lawn Mower from Carton, Howto SET Upyour Lawn Mower

Page 6

ASSEMBLY

Read these instructions and this manual in its entirety

before you attempt to assemble or operate your new lawn mower. Your new lawn mower has been assembled at the

factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM CARTON

Remove loose parts included with mower.

Cut down two end corners of carton and fay end panel down flat.

Remove alt packing materials except padding between upper and lower handIe and padding holding operator presence control bar to upper handle.

Roll lawn mower out of carton and check carton thor° ough!y for additiona! loose parts.

HOWTO SET UPYOUR LAWN MOWER

TO UNFOLD HANDLE (See Fig. i)

IMPORTANT: UNFOLD HANDLES CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.

Raise handles until lower handle section locks into place in mowing position.

Raise upper handle section into place on lower handle,

remove protective padding and tighten both handle knobs.

Remove handle padding hetding operator presence control bar to upper handle.

Your lawn mower handle can be adjusted for your mowing comfort. Refer to "Adjust Handle" in the Service and Adjustment section of this manual.

TO iNSTALL ATTACHMENTS (See Fig. 2)

Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging:

Open rear door and remove mufcher plate. Store mulcher plate in a safe place.

You can now install catcher or optional clipping deflec- tor.

To return to mulching operation, install mulcher plate into discharge opening of mower. Be sure all tabs are seated properly.

OPERATOR PRESENCE

CONTROLBAR

UPPER HANDLE

LIFT UP

MOWING POSITION

LOWER HANDLE

F_G. 1

SLOTS

\

MULCHER PLATE

TABS

 

FiG, 2

CAUTION: Do not run your lawn mower without mulcher plate in place or ap-

catcher in piece. Never attempt to op- proved clipping deflector or grass erate the tawn mower with the rear door

removed or propped open.

6

Image 6
Contents Rill rSMnN Preparation Maintenance and StorageTraining OperationMaintenance Agreement Limited TWO Year Warranty on Craftsman Power MowerCustomer Responsibilities Table of Contents Engine Replacement Optional BAG for Rear Catcher For DischargeMowers Lawn Mower Maintenance Lawn Mower PerformanceHowto SET Upyour Lawn Mower To Remove Lawn Mower from CartonTo Unfold Handle See Fig To Assemble and Attach Grass Catcher See Figs a thru 4CMeets Cpsc Safety Requirements OperationEngine Speed See Fig OperaticHowto Useyour Lawn Mower Engine Zone ControlMowing Tips Before Starting EngineTo Start Engine GAS See FigMulching Mowing Tips Responsibilities Section of this ManualCustomer Respo Fill in Dates AS YOU Complete Regular ServiceYservice Dates General RecommendationsDrive Wheels Customer ResponsibilitiesGrass Catcher Gear CaseMuffler CleaningClean Under Drive Cover LubricationRear Deflector To REMOVE/REPLACE Drive BeltSee Fig. t4 Engxne Speed CarburetorHandle See Fig StorageOther Fuel SystemService Notes Problem Cause Correction TROUBLESHOOT! PointsRotary Lawn Mower Model Number KEY Part NO. no DescriptionKEY Part Descrption NO, no Rotary Lawn Mower Model Number 9t7o372830 KEY PartGear Case Assembly Part Number KEY Part DescriptionKEY Part Craftsman 4--CYCLE Engine Msbel and Serial Numbers HereCraftsman 4-CYCLE Engine Part DescriptionCarburetor no Rewind Starter no Rewind Starter no PartIfyou Need Repair Service or Parts PRODUCT- Lawn MowerPart Number

917.37283 specifications

The Sears 917.37283 is a versatile lawn mower renowned for its reliability and impressive performance. Designed for homeowners and gardening enthusiasts alike, this mower seamlessly blends power and efficiency, making it a popular choice for maintaining a well-manicured lawn.

One of the notable features of the Sears 917.37283 is its robust engine. Powered by a reliable gas engine, it delivers the torque needed to tackle various types of grass and terrain. This means users can expect consistent cutting performance, whether mowing through thick grass or dealing with uneven surfaces. The engine’s design also focuses on fuel efficiency, allowing for longer mowing sessions between refuels.

The mower features a cutting width of typically 21 inches, providing a balance between maneuverability and efficiency. This size enables users to cut through larger areas in fewer passes compared to smaller models, without sacrificing the ability to navigate tighter spaces. Additionally, many models in this series offer adjustable cutting heights, allowing users to customize the length of their grass according to their preferences or seasonal requirements.

Another significant characteristic of the Sears 917.37283 is its ease of use. Equipped with a user-friendly starting mechanism, this mower often features an easy-to-pull recoil starter, reducing the effort needed to get the mower running. The ergonomic handle design adds to the comfort, allowing for better control and reduced fatigue during prolonged use.

Safety features are also integral to the design. The mower is equipped with safety mechanisms, including blade brakes that stop the blades when the user releases the control handle, ensuring protection against accidental injuries. The durable construction of the mower adds to its longevity, with materials designed to withstand the rigors of everyday use, including resistance to rust and corrosion.

Maintenance is straightforward, with an accessible air filter and easy-to-reach spark plugs, which simplifies routine care tasks. Some models provide the option for mulching capabilities, allowing grass clippings to be finely chopped and returned to the lawn, promoting healthy growth and reducing yard waste.

In summary, the Sears 917.37283 lawn mower is a solid choice for homeowners seeking a dependable and efficient mowing solution. With its powerful engine, adjustable cutting features, user-friendly design, and safety measures, it caters to diverse lawn care needs, making it an excellent addition to any gardening toolkit.