Sears 917.373981 owner manual To Assemble and AIrACH Grass Catcher See Figs a thru, Catcherframe

ASSEMBLY

TO ASSEMBLE AND A'I'rACH GRASS

CATCHER (See Figs. 3A thru 4)

•To assemble tubular frame to grass bag, work sewn hem of bag out through the front opening of bag to expose the hem.

•Thread tubular frame into hem and gather material at top of frame as shown.

•Push frame inside bag through the opening until only the ends of frame are exposed out of the front.

NOTE:" Do not close the flip lid at this time.

•Assemble lower frame to tubular frame as shown. Be sure frames are fully seated together as shown in inset.

•Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before

using.

•Close the flip lid. Flip lid must be closed while operating lawn mower.

Lift the rear door on the mower housing and place the

dgrasscatcher frame onto the formed tabs on the rear oor hinge bracket.

The grass catcher is secured to the lawn mower housing when the rear door is lowered onto the grass catcher frame.

FLIP LID

SEWN

HEM (Pull out through front of opening)

FIG. 3A

SEWN

HEM

TUBULAR FRAME

(Thread into sewn hem)

FIG. 3B

_TUBULAR

FIG. 3C

LOWER

TUBULAR

FRAME

(Frames must be fully seated)

FIG. 3D

CATCHERFRAME

\

FIG. 3E

HINGE

GRABS CATCHER FRAME

FORMED

TABS

FIG. 4

7