SERVUCE AND ADJ STMENTS
TO REPLACE HEADLIGHT BULB
,Raise hood.
=Pull bulb holder out of the hole in the backside of the grill.
=Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill
,CIosehood_
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor'to run poorly, stop running, or prevent it from starting.
=Check wiring_ See electrical wiring diagram in the Repair Parts section of this manual.
TO REPLACE FUSE
Replace with 30 amp
TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 28)
•Raise hood..
oUnsnap headlight wire connector_
=Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor..
•To replace, reverse above procedures.
HOOD
HEADLIGHT
WIRE
CONNECTOR
FIG. 28
24