Sears 917.25051 manual To Adjust Mower Cutting Height

Page 13

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can

result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

NOTE: Under certain conditions when tractor is standing

TO SET PARKING BRAKE (See Fig. 7)

Your tracto r is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

,Depress clutch/brake pedal into fult "BRAKE" position and hold.

idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

 

CAUTmON: A_ways stop tra

 

,_ _

pietely,

as described

above,

before leav-

 

 

ing the

operator's

position;

to empty

l

Place parking brake lever in "ENGAGED" position and release pressure from clutch/brake pedal. Pedal should remain in "BRAKE" position. Make sure parking brake will hold tractor secure.

 

ATTACHMENT

IGNITION

CLUTCH SWITCH

KEY

PULL OUT TO

PUSHIN TO

 

"DISENGAGE"

"ENGAGE"

CHOKE

CONTROL

LEVER

TO USE THROTTLE CONTROL (See Fig. 7)

Always operate engine at full throttle.

Operating engine at less than full throttle reduces the battery charging rate.

°Full throttle offers the best mower performance.

TO USE CHOKE CONTROL (See Fig. 7)

Use choke control whenever you are starting a cotd engine. Do not use to start a warm engine.

To engage choke control, pult knob out. Slowly push knob in to disengage.

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the gearshift lever.

-Start tractor with clutch/brake pedal depressed and gearshift lever in neutral (N) position.

oMove gearshift and range shift ievers to desired posi- tion.

oStowly release clutch!brake pedal to start movement.

IMPORTANT: BRING TRACTOR TO A COMPLETE STOP BEFORE SHIFTING OR CHANGING GEARS. FAILURE TO DO SO WILL SHORTEN THE USEFUL LIFE OF YOUR TRANSAXLE.

FIG. 7

STOPPING (See Fig. 7)

MOWER BLADES -

o Move attachment clutch switch to "DISENGAGED" position.

GROUND DRIVE -

Depress clutch/brake pedal into furl "BRAKE" position.

Move gearshift lever to neutral (N) position.

ENGINE -

Move throttle control to slow (_) position.

NOTE: Failure to move throttle control to slow (,_) position and alIowing engine to idle before stopping may cause engine to "backfire".

=Turn ignition key to "OFF" position and remove key.

Always remove key when leaving tractor to prevent unauthorized use.

Never use choke to stop engine.

13

 

 

TO ADJUST MOWER CUTTING HEIGHT

(See Fig. 7)

The cutting height is controlled by turning the height adjust- ment knob in desired direction.

-Turn knob clockwise (S-_) to raise cutting height.

Turn knob counterclockwise (1_-_) to lower cutting height.

The cutting height range is approximately 1-1/4" to 4-1/4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approxi- mate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

,The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches

during hot months. For healthier and better looking lawns, mow often and after moderate growth,

. For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

Image 13
Contents Convertible III. Children Safe Operation Practices for Ride-On MowersII. Slope Operation Model Maintenance AgreementContents Maintenance Accessori and Attach EntsEngine PerformanceContents Pack To Remove Tractor from Carton Tools Required for AssemblyUnpack Carton Attach Steering Wheel See FigConnect Battery See Fig AssemblyInstall Seat See Fig Check Tire PressureFigs Install Mower and Drive Belt SeeCheck Deck Levelness Check for Proper Position of ALL BeltsInstall Mulcher Plate ChecklistSee Figs a and 5B To Convert to Bagging or DischargingLock OperationKnow Your Tractor OperationTo Adjust Mower Cutting Height Check Engine OIL Level See Fig To Adjust Gauge Wheels See FigADD GasolineTo Start Engine See Fig Mowing TipsMulching Mowing Tips Maintenance Schedule Lubrication ChartCustomer Responsibilities General RecommendationsBrake Operation TractorTires Blade CareTo Clean Battery and Terminals BatteryCustom Espo Ilities LubricationEngine OIL Filter Spark PlugsIN=LfNE Fuel Filter See Fig To Level Mower Housing To Install MowerSE CE Ustm NTS To Remove Mower See FigTo Replace Mower Drive Belt AdjustmentsTo Adjust Attachment Clutch ServiceTo Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Adjust Steering .WHEEL Alignment Service and AdjustmentsFront Wheel TOE-IN Adjustment To Replace Motion Drive Belt See FigSee Figs Service AdjustmentsTo Replace Headlight Bulb Interlocks and RelaysTo Remove Hood and Grill Assembly See Fig To Adjust Attachment LiFT SpringTo Adjust Carburetor See Fig= To Adjust Throttle Control Cable See FigsFinal Setting EngineFuel System SERV!CE NotesEngine OIL CyundersTRO Leshooting NTS Problem Cause CorrectionCorrection Problem CauseWiring Insulated Clips Tractor = Model Number SchematicStorage Electrical Tractor - Model NumberKEY Part Tractor = -MODEL NumberChassis and Enclosures Tractor - Model Number 917,250510NO. no Tractor == Model NumberDescription KEY Part NO. noOUtDD\ Ground Drive Tractor = Model NumberKEY Part Description Steering Assembly KEY Part NO, no Steering Assembly2627 Tractor = Model Number Description Seat AssemblyKEY Part NO. NO. Description Decals Tractor = = Model NumberKEY Part Description Lift Assembly Repair Parts Tractor .. Model Number 9Tractor =- Model Number Lift AssemblyKEY Part NO. no Mower Deck Tractor =- Model Number 917,250510 Transaxle Tractor -- Model NumberTractor o .- Model Number 917=250510 Baffles and Roud Kohler Engine Model Number MV20S, Type NumberKohler Engine Model Number MV20S, Type Number Tractor ---MODEL NumberAIR Intake KEY Part NO. no Baffles & Shroud KEY Partdescription NO. noKohler Engine = Model Number MV20S, Type Number Tractor --MODELNUMBERCrankcase KEY Part Tractor -.- Model NumberCarburetor Description KEY PartCrankshaft Kohler Engine Model Number MV20S Type NumberTractor -MODEL Number Tractor =- Model Number Fuel Pump KEY Part Flywheel KEY PartdescriptionNO, no Governor KEY Part NO. noCamshaft and Valves Camshaft & Valves Kohler Engine --MODEL Number MV20S, Type NumberPiston & ROD KEY Part Description OIL Pump KEY Partdescription NO, noICE Otes Page RV!CE MAX Suggested Guide for Sighting Slopes for Safe OperationFor Repair SERVICE, Call this Toll Free Number If YOU Need Repair Service Or PartsOwners Manual Part Number ,PART Description

917.25051 specifications

The Sears 917.25051 lawn mower is a product that has made its mark in the gardening and landscaping sectors, renowned for its combination of robust features, advanced technologies, and user-friendly design. This model is particularly favored by homeowners who appreciate both efficiency and reliability when maintaining their lawns.

At the heart of the Sears 917.25051 is its powerful gas engine, which provides an impressive amount of torque and horsepower, making it suitable for a variety of grass types and terrains. The engine is complemented by an easy-start mechanism that minimizes the hassle of getting the mower up and running. This enables even novice users to quickly begin their mowing tasks with minimal fuss.

One of the standout characteristics of the Sears 917.25051 is its cutting deck, which boasts a generous width, allowing users to cover larger areas in less time. The cutting height is adjustable, providing homeowners with the flexibility to achieve their desired lawn length, whether aiming for a traditional manicured look or leaving grass slightly longer for increased resilience. The mower is equipped with sharp, durable blades engineered to deliver a clean cut, which is crucial for promoting healthy grass growth.

The technology used in the Sears 917.25051 also includes features aimed at enhancing user comfort and control. The ergonomic handle is designed for maximum comfort, reducing strain during extended use. The mower's lightweight construction makes it easy to maneuver, even in tight spaces, ensuring that users can navigate around flower beds, trees, and other landscaping elements without difficulty.

In terms of maintenance, the Sears 917.25051 is designed with user convenience in mind. The air filter is easily accessible, allowing for quick cleaning and replacement as needed. Additionally, the fuel tank features a transparent section, which helps users monitor fuel levels without having to open or remove the lid.

Durability is another notable aspect of the Sears 917.25051. Constructed with high-quality materials, this mower is built to withstand the rigors of regular use while retaining optimum performance. The wheel assembly is also robust, providing stability on uneven terrain and ensuring a smooth mowing experience.

In conclusion, the Sears 917.25051 lawn mower is an exceptional choice for homeowners seeking a blend of power, performance, and ease of use. Its combination of advanced features and reliable technology ensures that maintaining a beautiful lawn is an achievable task for anyone ready to take on the challenge. With proper care, this mower can serve its users well for many seasons to come.