General, Electrical, Cables, Maximum rating

SAFETY PRECAUTIONS

If not used properly this Hedgetrimmer can be dangerous! This Hedgetrimmer can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this Hegetrimmer. The operator is responsible for following the warning and safety instructions in this manual and on the Hedgetrimmer.

Explanation of Symbols on the HT42, HT420, HT450, HT600

Warning.

Read the user instructions carefully to make sure you understand all the controls and what they do.

Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged. Keep the cable away from the blade.

Do not use in the rain or leave the Hedgetrimmer outdoors while raining.

The use of eye protection is recommended.

General

1.Never allow children or people unfamiliar with these instructions to use the Hedgetrimmer. Local regulations may restrict the age of the operator.

2.Only use the Hedgetrimmer in the manner and for the functions described in these instructions.

3.Never operate the Hedgetrimmer when you are tired, ill or under the influence of alcohol, drugs or medicine.

4.The operator or user is responsible for accidents or hazards occurring to other people or their property.

Electrical

1.The use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA is recommended. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it.

2.Before use, examine cable for damage, replace it if there are signs of damage or ageing.

3.Do not use the Hedgetrimmer if the electric cables are damaged or worn.

4.Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one.

5.Your electric cable must be uncoiled, coiled cables can overheat and reduce the efficiency of your Hedgetrimmer.

6.Keep cable away from the cutting area.

7.Do not pull cable around sharp objects.

8.Always switch off at the mains before disconnecting any plug, cable connector or extension cable.

9.Switch off, remove plug from mains and

examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Electrolux replacement

cable.

10.Always wind cable carefully, avoiding kinking.

11.Never carry the product by the cable. 12.Never pull on the cable to disconnect any of

the plugs.

13.Use only on AC mains supply voltage shown on the product rating label.

14.Electrolux products are double insulated to EN60335. Under no circumstance should an

earth be connected to any part of the product.

Cables

Use only 1.00mm2 size cable up to 30 metres length maximum.

Maximum rating:

1.00mm2 size cable 10 amps 250 volts AC

1.Mains cables and extensions are available from your local Electrolux Outdoor Products Approved Service Centre.

2.Only use extension cables specifically

designed for outdoor use.

Preparation

1.Always wear suitable clothing, gloves, and stout shoes. The use of safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts.

2.Thoroughly inspect the area where the Hedgetrimmer is to be used and remove all

ENGLISH - 1

5119562-01, 96481476200, HT42, HT450, HT420 specifications

The McCulloch 5119562-01, 96481476200, HT420, HT450, and HT42 are part of McCulloch's esteemed range of hedge trimmers designed for both the amateur gardener and professional landscaper. Known for their reliability, these tools blend powerful performance with ergonomic design, catering to a variety of gardening needs.

One of the main features of these hedge trimmers is the potent engine, which provides the necessary power to tackle thick branches and dense hedges. The McCulloch HT420 and HT450 models come equipped with a robust 40 cc engine, ensuring that users can complete their trimming tasks efficiently. The HT42 model features a slightly less powerful engine but still offers ample performance for small to medium-sized gardens.

These hedge trimmers employ a dual-action cutting blade system, which enhances cutting efficiency and reduces vibrations during operation. This technology allows for smoother trimming, minimizing fatigue during prolonged use. The blades are designed for precision cutting, ensuring clean edges and promoting healthy plant growth.

Another notable characteristic is the trimmers’ ergonomic design. Each model is equipped with a lightweight frame and an adjustable handle that allows users to achieve a comfortable grip, reducing strain on the arms and back. The inclusion of an anti-vibration system further enhances user comfort, making these trimmers ideal for extensive landscaping tasks.

McCulloch also emphasizes safety in its designs. The hedge trimmers come with a blade guard and a start/stop button that is easily accessible, ensuring that the tool can be operated safely. These features help protect the user during both operation and transportation.

Lastly, the build quality of the 5119562-01, 96481476200, HT420, HT450, and HT42 models is commendable. Crafted from durable materials, they are built to endure the rigors of outdoor use. Regular maintenance is made easy with accessible components for cleaning and replacing parts.

In summary, McCulloch's HT series hedge trimmers, including the HT420, HT450, and HT42, offer a powerful, efficient, and user-friendly solution for trimming hedges and shrubs. Their robust engines, dual-action blades, ergonomic design, and emphasis on safety make them a reliable choice for anyone looking to maintain their garden with ease and precision.