How to Use, Fault Finding Hints | McCulloch HT450, HT600, HT420

How to Use

How to Use your Hedgetrimmer

1.Inspect area to be cut before each use - remove objects which can be thrown or become entangled in the cutting blades.

2.Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position.

3.Allow the cutting blades to reach full speed before entering the material to be cut.

4.Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc.

5.If blade stalls, immediately stop the Hedgetrimmer. Disconnect the Hedgetrimmer

from the power source and clear jammed debris from the cutting blades. Inspect blades and repair or replace as needed.

Top Cutting

Use a wide sweeping motion. (Fig. H) A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results.

Side Cutting

When trimming the sides of the hedge, begin at the bottom and cut upwards (Fig. J), tapering the

hedge inward at the top. This shape will expose more of the hedge, resulting in more uniformed growth.

Caring for your Hedgetrimmer

Cleaning (K)

• USE GLOVES

1.Using a soft brush - remove debris from all air intakes and cutting blade.

2.Wipe over surface of your hedgetrimmer with

a dry cloth.

•IMPORTANT

Never use water for cleaning your hedgetrimmer. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts.

Lubricating the Cutting Blade

For easier operation and longer life, lubricate the cutter blades before and after use. Apply the oil so that it runs between the two blades. See Pic L.

At the end of the Cutting Season.

1.Clean your Hedgetrimmer thoroughly.

2.Check that all nuts and bolts are secure.

3.Visually inspect the Hedgetrimmer for any worn or damaged parts, contact your local Service Centre if any parts require replacement.

To store your Hedgetrimmer

•The Hedgetrimmer blade cover/storage holder

is provided with 2 hanging slots for storing the Hedgetrimmer on the wall. (M)

•Ensure the blade cover/storage holder is fitted before storage.

1.The use of 2 number 10 screws (40mm in length) and the appropriate wall fixing plugs is recommended

2.Drill 2 horizontal holes 47mm apart.

3.Fit wall plugs.

4.Fit screw ensuring enough length is available for secure location into hanging slot.

•Your mains cable can be stored with the blade cover/storage holder fitted. (Pic N & P)

•Store in a dry place where your hedgetrimmer is protected from damage.

Fault Finding Hints

Fails to Operate

1.Is the Power Turned On?

2.Check the fuse in the plug, if blown replace.

3.Fuse continues to blow?

Disconnect from the mains electricity supply and consult your local approved Electrolux Outdoor Products Service Centre.

Cutting blade stops under load

1.Cut at a slower pace.

2.If cutting blade still stops under load?

Disconnect from the mains electricity supply and consult your local approved Electrolux Outdoor Products Service Centre.

Cutting blade stops under load

1.Cut at a slower pace.

2.If cutting blade still stops under load?

Disconnect from the mains electricity supply and consult your local approved Electrolux Outdoor Products Service Centre.

Fails to stop when one switch lever is released. Disconnect from the mains electricity supply and consult your local approved Electrolux Outdoor Products Service Centre.

Poor cut quality

1.Ensure the product is being used correctly (see How to Use)

2.Ensure blades are free from trapped debris

3.Damaged Blades?

Disconnect from the mains electricity supply and consult your local approved Electrolux Outdoor Products Service Centre.

Excessive Vibration

Disconnect from the mains electricity supply

and consult your local approved Electrolux

Outdoor Products Service Centre.

ENGLISH - 3

5119562-01, 96481476200, HT42, HT450, HT420 specifications

The McCulloch 5119562-01, 96481476200, HT420, HT450, and HT42 are part of McCulloch's esteemed range of hedge trimmers designed for both the amateur gardener and professional landscaper. Known for their reliability, these tools blend powerful performance with ergonomic design, catering to a variety of gardening needs.

One of the main features of these hedge trimmers is the potent engine, which provides the necessary power to tackle thick branches and dense hedges. The McCulloch HT420 and HT450 models come equipped with a robust 40 cc engine, ensuring that users can complete their trimming tasks efficiently. The HT42 model features a slightly less powerful engine but still offers ample performance for small to medium-sized gardens.

These hedge trimmers employ a dual-action cutting blade system, which enhances cutting efficiency and reduces vibrations during operation. This technology allows for smoother trimming, minimizing fatigue during prolonged use. The blades are designed for precision cutting, ensuring clean edges and promoting healthy plant growth.

Another notable characteristic is the trimmers’ ergonomic design. Each model is equipped with a lightweight frame and an adjustable handle that allows users to achieve a comfortable grip, reducing strain on the arms and back. The inclusion of an anti-vibration system further enhances user comfort, making these trimmers ideal for extensive landscaping tasks.

McCulloch also emphasizes safety in its designs. The hedge trimmers come with a blade guard and a start/stop button that is easily accessible, ensuring that the tool can be operated safely. These features help protect the user during both operation and transportation.

Lastly, the build quality of the 5119562-01, 96481476200, HT420, HT450, and HT42 models is commendable. Crafted from durable materials, they are built to endure the rigors of outdoor use. Regular maintenance is made easy with accessible components for cleaning and replacing parts.

In summary, McCulloch's HT series hedge trimmers, including the HT420, HT450, and HT42, offer a powerful, efficient, and user-friendly solution for trimming hedges and shrubs. Their robust engines, dual-action blades, ergonomic design, and emphasis on safety make them a reliable choice for anyone looking to maintain their garden with ease and precision.