Fault Finding Hints, Fails to Operate | McCulloch 964814301, HT51

Fault Finding Hints

Fails to Operate

1.Is the Power Turned On?

2.Check the fuse in the plug, if blown replace.

3.Fuse continues to blow?

Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Cutting blade stops under load

1.Cut at a slower pace.

2.If cutting blade still stops under load?

Disconnect from the mains electricity sup- ply and consult your local approved Service Centre.

Fails to stop when one switch lever is released. Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Poor cut quality

1.Ensure the product is being used correctly (see How to Use)

2.Ensure blades are free from trapped debris

3.Damaged Blades?

Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Excessive Vibration

Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Environmental Information

Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manu- factured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.

•Packaging is recyclable and plastic compo- nents have been labelled (where practical) for categorised recycling.

•Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

•If necessary, contact your local authority for disposal information.

The symbol on the product or on its packag- ing indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative conse- quences for the environment and human health, which could otherwise be caused by inappropri- ate waste handling of this product.

For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.

Guarantee & Guarantee Policy

If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna Outdoor Products, through its Authorised Service Repairers will effect the repair or replace- ment to the customer free of charge providing:

(a)The fault is reported directly to the Authorised Repairer.

(b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty adjustment by the user.

(d)The failure has not occurred through fair wear and tear.

(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna Outdoor Products.

(f)The machine has not been used for hire.

(g)The machine is owned by the original purchaser.

(h)The machine has not been used outside of the country for which it was specified.

(i)The machine has not been used commercially.

*This guarantee is additional to, and in no way diminishes the customers statutory rights.

Failures due to the following are not covered, there- fore it is important that you read the instructions con- tained in this Operator's Manual and understand how to operate and maintain your machine:

Failures not covered by guarantee

*Replacing worn or damaged blades

*Failures as a result of not reporting an initial fault.

*Failures as a result of sudden impact.

*Failures as a result of not using the product in accordance with the instructions and recommen- dations contained in this Operator's Manual.

*Machines used for hire are not covered by this guar- antee.

*The following items listed are considered as wearing parts and their life is dependent on regu- lar maintenance and are, therefore not normally subject to a valid warranty claim: Blades, Electric Mains cable.

*Caution!

Husqvarna Outdoor Products does not accept lia- bility under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna Outdoor Products, or by the machine having been modified in any way

964814301, 964815301, 964814401, 964815901, HT510 specifications

The McCulloch 964815301, along with its counterparts HT51 and HT60, represents a range of high-performance hedge trimmers designed to simplify the task of maintaining gardens and landscapes. With a focus on efficiency and ease of use, these models are tailored for both homeowners and professionals who require reliable and effective tools.

One of the standout features of the McCulloch hedge trimmers is their robust engine performance. The models are equipped with powerful engines that provide ample cutting power, allowing users to tackle thick hedges and overgrown shrubs with ease. For those who prioritize lightweight tools, these models balance power with portability, ensuring that even extended use does not lead to operator fatigue.

The design of the cutting blades is another highlight. The McCulloch 964815301 features dual-action blades that produce a smooth, clean cut while reducing vibrations, thus enhancing user comfort. The blades are often designed to be self-sharpening, ensuring that they maintain their cutting efficiency over time, which is crucial for achieving professional-grade results with every use.

Technologically, McCulloch has integrated safety features into these models. The inclusion of protective guards and safety switches provides peace of mind, safeguarding users against accidental starts and potential injuries. Additionally, the ergonomic handles are designed for enhanced grip and reduced strain, allowing for precise control and maneuvering in tight spaces.

Another notable characteristic is the versatility of the McCulloch hedge trimmers. Models like the HT51 and HT60 offer adjustable cutting angles, enabling users to reach various heights and shapes while making the task more straightforward. This adaptability is instrumental for users who have diverse landscaping needs, from trimming basic hedges to shaping intricate topiaries.

In conclusion, the McCulloch 964815301, HT51, and HT60 hedge trimmers stand out due to their combination of powerful performance, advanced features, and user-centric design. They cater to both casual gardeners and landscaping professionals, making them a reliable choice for anyone looking to maintain their green spaces effectively. With a focus on safety, comfort, and cutting efficiency, these models exemplify McCulloch's commitment to providing high-quality tools that deliver exceptional results.