SERVICE AND ADJUSTMENTS
REPLACING THE LINE
1.Press the tabs on the side of the trimmer head and remove cover and spool.
5.When installing new line on an existing spool, hold the spool as shown.
6.Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot.
Slot
TabTab
Cover
Spool
2.Remove any remaining line.
3.Clean dirt and debris from all parts. Re- place spool if it is worn or damaged.
4.Replace with a
WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.
7.With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction.
8.Position the lines in the guide slots. Guide slot
Guide slot
9.Place the spool in the cover as shown below.
15