Sears 172.10855 warranty Operation, SAW Blades, Causes of Kickback

Page 9

OPERATION

OPERATION cont.

SAW BLADES

All saw blades need to be kept clean, sharp and properly set in order to cut efficiently. Using a dull blade places a heavy load on the saw and increases the danger of kickback. Keep extra blades on hand, so sharp blades are always available. Gum and wood pitch hardened on the blade slows the saw down. Use gum and pitch remover, hot water or kerosene to remove them. DO NOT use gasoline.

Fig. 4

Lower Blade Guard retracts automatically when cut is being made

Lower Blade Guard lever is in UP position when making a cut

Blade 1/4-in. or less is Exposed on Underside of Workpiece

KICKBACK…WHAT CAUSES IT AND WAYS TO HELP PREVENT IT (Fig. 5)

The Causes of Kickback

Fig. 5

Correct Blade Depth

(should not exceed 1/4-in. Blade is Set Too Deep below work piece)

KICKBACK

BLADE GUARD SYSTEM (Fig. 4)

1. Kickback is a sudden reaction to a pinched,

Fig. 6

The lower blade guard, attached to your circular saw, is there for your protection and safety. It should NEVER be altered for any reason. If it becomes damaged or begins to return slowly or sluggishly, DO NOT operate your saw until the damage has been repaired or replaced. ALWAYS leave the guard in its correct operating position when using the saw.

!CAUTION: NEVER use the saw when the guard is not operating properly. The guard should be checked for correct operation before each use. If you drop your saw, check the lower blade guard and bumper for damage at all depth settings before using.

NOTE: The guard is operating properly when it moves freely and then readily returns to the closed position. If for any reason your lower blade guard and bumper does not close freely, take the saw to your nearest Sears Repair Center for service before using it.

bound or misaligned saw blade, which

causes an uncontrolled saw to lift up and

out of the workpiece and toward

the operator.

2. When the blade is pinched or bound tightly

by the kerf closing down, the blade stalls and

the motor reaction drives the unit rapidly back

towards the operator.

3. If the blade becomes twisted or misaligned in

the cut, the teeth at the back edge of the blade

can dig into the top surface of the wood. This

causes the blade to climb out of the kerf and

jump back towards the operator.

4. Sawing into knots or nails in the workpiece

can cause Kickback.

5. Sawing into wet or warped lumber can

cause Kickback. (see Fig. 6a)

6. Forcing a cut, or not supporting the workpiece

correctly can cause Kickback. (see Fig. 6a)

7. Kickback is a result of tool misuse and/or

incorrect operating procedures or conditions.

It can be avoided by taking the proper

precautions, on page 19.

Right

Support

Fig. 6a

Wrong Support

16

17

REV 10855

2-12-08

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A 4-in. Circular SawSafety Symbols Table of ContentsSafety Instructions Safety InstructionsWork Area Safety Personal SafetyElectrical Safety SAFETYSAFETYINSTRUCTIONScontcontSafety Symbols for Your Tool Service SafetySafety Rules for Circular Saws Safety Rules for Circular SawsAdditional Rules for Safe Operation Work in a well-ventilated areaGlossary of Terms for Woodworking UnpackingAdditional Rules for Safe Operation Assembly AssemblyUnpacking Description This Circular Saws have the following featuresDescription Know Your Circular SAW FigOperation OperationSAW Blades Causes of KickbackMaking DEPTH-OF-CUT Adjustments Fig Ways to Help Prevent KickbackTo SET the Blade Depth a Starting a CUT Fig To Help Maintain ControlMaking Cross Cuts and RIP Cuts and 12a Installing and Using the Edge Guide sold separately Fig HOW to SET Your Bevel Angle FigMaking RIP Cuts Making Bevel Cuts FigsRoutine Maintenance MaintenanceMaking Bevel Cuts Figs Making Pocket Cuts Fig LubricationAccessories TroubleshootingIf the blade does not follow a straight line If the blade binds or smokes from frictionGet it fixed, at your home or ours

172.10855 specifications

Sears 172.10855, a prominent model in the realm of home appliances, has gained attention for its innovative features, reliability, and user-friendly design. This versatile appliance is designed to meet the needs of modern households, combining style with functionality.

One of the standout features of the Sears 172.10855 is its energy efficiency. Equipped with advanced technologies, this model is built to minimize energy consumption while delivering optimal performance. The Energy Star certification ensures that consumers can rely on this appliance not only for its effectiveness but also for its environmental impact.

The design of the Sears 172.10855 emphasizes ease of use. The intuitive controls are user-friendly, making it accessible for individuals of all ages. Whether navigating through various settings or adjusting temperature and settings, users will find the experience seamless and straightforward.

In terms of performance, the Sears 172.10855 excels with its powerful motor and robust build quality. This appliance is designed to handle a variety of tasks, from simple weekly chores to more demanding jobs. Its versatility allows it to adapt to different kitchen environments and user preferences, making it a staple for many homeowners.

Another important aspect of the Sears 172.10855 is its capacity. It offers ample space for various cooking or storage needs, making it ideal for both small families and larger households. The spacious interior ensures that users can efficiently organize their items without the hassle of overcrowding.

Safety is also a priority in the design of the Sears 172.10855. The appliance features multiple safety mechanisms that protect users from potential hazards, such as overheating or electrical malfunctions. These safety features provide peace of mind, allowing users to focus on their tasks without unnecessary worry.

Additionally, the Sears 172.10855 is aesthetically pleasing, blending well into any kitchen decor. Its modern design and sleek finishes enhance the overall look of the space, making it a functional yet stylish addition to a household.

In conclusion, the Sears 172.10855 stands out in the market due to its energy efficiency, user-friendly design, powerful performance, ample capacity, and robust safety features. For those seeking a reliable, versatile appliance that combines modern technology with ease of use, the Sears 172.10855 is an excellent choice that meets the demands of contemporary living.
Top Page Image Contents