Strings will not feed when bumping during use as per instructions:
1.Strings have become
stuck together due to heat or storage time.
2.Not enough string present in spool.
3.Strings are tangled
on spool
1.Unplug trimmer. Open spool cover. Remove spool, unwind line and then rewind onto spool housing.
2.Unplug trimmer. Open spool cover. Remove spool and replace with new line or new spool assembly as per instructions in manual.
3.Unplug trimmer. Open spool
cover. Remove spool unwind and remove tangled line. Rewind line as per instructions in this manual.
Grass wraps around drive shaft housing and string head.
1.Cutting tall grass at ground level.
1.Cut tall grass from the top down to prevent wrapping.
Motor fails to start when switch trigger is depressed.
1. Power cord is not plugged 1. Plug in the power cord. in or connection is loose.
2. Household circuit breaker 2. Check circuit breaker. is tripped.
3.Extension cord may be faulty.
3.Try another extension cord or connect into another wall receptacle socket on a different circuit.