Cutting Line, Spool or Line Replacement | Sears 900.74526 instruction

3.To convert for maintenance edging (Figure 8) unplug from power source, depress conversion button and rotate the motor housing.

4.When the button snaps back into place the tool is locked in the edger position.

5.Return to trimming position by unplugging the tool, depressing the button and rotating back.

6.To operate as a maintenance edger, position tool above sidewalk, as shown in Figure 9. Rest edge guide as shown.

3.Lift the spool of nylon line out of the hub and clear any broken line or cutting debris from the spool area.

4.Unwrap about one foot (30 cm) of line and inspect it for damage. Cut away and discard any damaged line. If line is okay rewind it and insert the line end through the eyelet in the spool hub as shown in Figure 11. Pull on the line end to keep it taut while placing the spool down into the hub, as shown in Figure 11.

5.Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn a few degrees left and right freely). Take care to keep the line from becoming trapped under the spool.

6.Snap the hub cover and spring back on and turn the tool on. In a few seconds or less you’ll hear the nylon line being cut automatically to the proper length.

CUTTING LINE

Your trimmer uses only .065” (1.65 mm) diameter, ROUND nylon line to cut grass and weeds quickly and easily. During use, the tip of the nylon line will become frayed and worn and the special self feeding line hub will automatically feed and trim a fresh length of line. Cutting line will wear faster and require more feeding if the cutting or edging is done along sidewalks or other abrasive surfaces or heavier weeds are being cut. The advanced automatic line feeding mechanism senses when more cutting line is needed and feeds and trims the correct length of line whenever its required. DO NOT BUMP unit on ground in attempt to feed line or for any other purposes.

CLEARING JAMS AND TANGLED LINES From time to time, especially when cutting thick or stalky weeds, the line feeding hub may become clogged with sap or other material and the line will become jammed as a result. To clear the jam, follow the steps listed below.

1.Unplug the trimmer.

2.Press the release tabs on the hub cover, as shown in Figure 10 and remove the cap by pulling it straight off.

11	Cutting Line

SPOOL OR LINE REPLACEMENT

(Use only 0.065” diameter ROUND line)

1.Unplug the trimmer.

2.Press the release tabs on the line hub cover, as shown in Figure 10. Remove the cover by pulling it straight off.

3.Remove the spool from the tool. Discard it if you plan to replace it. Remove and discard all line from it if you plan to rewind it with new line.

900.74526 specifications

The Sears 900.74526 is a versatile and robust piece of equipment designed for various applications, standing out in the marketplace for its innovative features and user-friendly design. One of the main highlights of this model is its powerful motor, which delivers impressive performance and efficiency. The 900.74526 boasts a reliable power output that ensures consistent operation, making it suitable for both light and heavy-duty tasks.

In terms of design, the Sears 900.74526 incorporates ergonomic elements, allowing for ease of use and comfort during extended periods of operation. The handle is crafted to prevent slippage, ensuring secure control even in demanding conditions. This feature enhances the overall user experience, reducing fatigue and improving productivity.

The technology used in the Sears 900.74526 sets it apart from competitors, showcasing a blend of traditional construction and modern ingenuity. This model often includes advanced components such as an electronic speed control system, which provides precise adjustments to suit different project needs. This ability to finely tune the speed can significantly impact the quality of work and allow users to achieve professional results with minimal effort.

Another characteristic that enhances the functionality of the Sears 900.74526 is its compatibility with a range of accessories, expanding the machine's capabilities. This adaptability means users can customize their setup based on specific tasks, whether it’s for cutting, sanding, or other applications.

Durability is a critical aspect of the Sears 900.74526. Constructed with high-quality materials, it is designed to withstand wear and tear, ensuring longevity in demanding environments. This resilience offers peace of mind to users, knowing they are investing in a product that will serve them well over time.

The Sears 900.74526 also emphasizes safety features, including built-in protective mechanisms that help prevent accidents during operation. These safety enhancements ensure that users can focus on their work without undue concern for their well-being.

Overall, the Sears 900.74526 stands as a testament to quality and innovation. Its blend of power, ergonomic design, advanced technology, and safety features make it a valuable tool for both professionals and DIY enthusiasts alike. With the Sears 900.74526, users can expect reliable performance that meets the demands of their projects, ensuring excellent results every time.