3M MP8750 manual Battery Replacement, Replacing Batteries

5-2. Battery Replacement

The remote control uses two AAA batteries. The battery cover is located on the back of the remote control.

1.Press the locking tab (1) to release door. Figure 5-1)

2.Lift up on the door (2) to remove it and set it to the side.

3.Remove old batteries.

4.Install new batteries (3). Make sure the polarity (+/-) on each battery matches the decal.

5.Replace battery compartment door.

Figure 5-1. Replacing Batteries

© 3M 1999 3M™ Multimedia Projector MP8750 13