3M MP8750 Advanced Setup Description / Action Default, Info display only Description / Action

4-5. Menu Adjustments/Settings, continued

Advanced Setup	Description / Action	Default
(PC/RGB)		Setting
Submenu Items
Projection (drop down	Select projection orientation	standard
window)	(standard / Rear / Rear/Ceiling /
	Ceiling)
Remote Control	Remote control receiver -on / -off	-on
RC Address	Select remote control address	1
	(1 / 2 / 3 / 4)
Sync Mode1	Select Sync Mode for PC/RGB1	separate TTL
(drop down window)	(separate TTL / composite TTL /
	separate ana. / composite ana. /
	sync on green)
Sync Mode2	Select Sync Mode for PC/RGB2	separate TTL
(drop down window)	(separate TTL / composite TTL /
	separate ana. / composite ana. /
	sync on green)
SOG Level	Adjust level for sync on green
	synchronization
Reset Data Modes	Set all data modes to factory default
	settings.
Reset lamp display	Resets the lamp hours displayed on
	the Info window
Test	Display test submenu

Advanced Setup	Description / Action	Default
(Video)		Setting
Submenu Items
Projection	Select projection orientation	standard
(drop down window)	(standard / Rear / Rear/Ceiling /
	Ceiling)
Remote Control	Remote control receiver -on / -off	-on
RC Address	Select remote control address	1
	(1 / 2 / 3 / 4)
Video standard	Select Video standard	automatic
(drop down window)	(PAL B,G,H,I / NTSC M / SECAM /
	NTSC 44 / PAL M / PAL N / PAL 60 /
	NTSC COMB / automatic)
Reset lamp display	Resets the lamp hours displayed on
	the info window
Test	Display test submenu

Test	Description / Action	Default
Submenu Items		Setting
Parameter display	Parameter display window	-off
	-on / -off
Color test picture	Display color test picture
Frame test picture	Display frame test picture

Info (display only)	Description / Action
Hardware	Current hardware level
Firmware	Current firmware level
VESA xxxxxxxxxx	Current video mode
Lamp (bar indicator)	Lamp life hours (Green: lamp good /
	red: lamp needs replacement)
OK!	Closes the Info display by pressing
	the Enter button

Advanced Setup

Projection	standard
Remote Control
RC Address	1
Sync Mode1	separate TTL
Sync Mode2	separate TTL

SOG level

Reset Data Modes

Reset lamp display

Advanced Setup

Projection	standard
Remote Control
RC Address	1
Video standard	automatic
Reset lamp display
Test

Test

Parameter display

Color test picture

Frame test picture

3M

MP8750

Hardware: xxx-x.xx-x

Firmware: xxx-x.xx

VESA 1024 x 768 75 Hz Lamp

OK!

© 3M 1999 3M™ Multimedia Projector MP8750 11