Safety Instructions

!WARNING: if correctly used, this electric Edger is an easy to handle and efficient tool; if used improperly or without the due precautions it could become a dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety rules that are contained in this manual.

!WARNING: BE SURE to read and understand all instructions in this manual before using this electric Edger. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

!WARNING: To avoid mistakes that could cause serious injury, DO NOT plug in this tool until the following instructions have been read and understood.

WORK AREA SAFETY

1.ALWAYS avoid dangerous conditions. DO NOT use in wet or damp areas or expose to rain.

2.DO NOT operate in the presence of flammable liquids, gases, or dust. Electric tools create sparks which may ignite dust or fumes.

3.ALWAYS keep bystanders and visitors at a safe distance while operating

an Edger. NEVER allow children near the tool. Flying objects can injure anyone in the area.

4.CHILDPROOF your tools with padlocks and master switches. Lock tools away when not in use. This Edger is not a toy.

5.DO NOT use the Edger without adequate lighting. ALWAYS make sure that you can see what you are edging.

6.BEFORE using the Edger, remove any stones, sticks, debris or objects that could be entangled in or thrown by the Edger.

PERSONAL SAFETY

!WARNING:The operation of any Edger can result in FOREIGN OBJECTS BEING THROWN, which can result in personal injury or property damage. ALWAYS use proper safety equipment.

1.KNOW your tool. Read the operator’s manual carefully. Learn the electric Edger’s applications and limitations, as well as the specific potential hazards related to this tool.

2.STAY ALERT, watch what you are doing and use common sense when operating this tool.

3.DO NOT use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating this tool may result in serious personal injury.

4.DRESS properly. Wear rubber gloves and substantial rubber soled footwear when working outdoors. DO NOT operate lawn and garden tools when barefoot or wearing open sandals. Wear long pants and long sleeves to protect your legs and arms. Edgers can pick up objects such as rocks and send them flying at fast speeds.

DO NOT wear loose clothing or jewelry. Keep your hair, clothing, and gloves away form moving parts. Loose clothing or long hair can be caught in moving parts.

SAFETY INSTRUCTIONS cont.

PERSONAL SAFETY cont.

5.USE SAFETY EQUIPMENT. Always wear safety goggles or safety glasses with side shields or full face shield, proper work shoes with rubber non-slip soles, heavy-duty non-slip rubber gloves and dust mask or respirator and hearing protection. Hard hat should be used for appropriate conditions.

6.DO NOT overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

TOOL USE AND CARE SAFETY

!WARNING: BE SURE to read and understand all instructions before operating this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

1.DO NOT use the tool if switch does not turn it “On” or “Off”. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

2.DISCONNECT the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

3.STORE idle tools out of the reach of children and other untrained persons. Children MUST NOT operate the tool. Tools are dangerous in the hands of untrained users.

4.MAINTAIN tools with care. ALWAYS keep cutting tools clean and in good working order.

5.CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced

before using. Many accidents are caused by poorly maintained tools.

6.USE ONLY cutting blades that are recommended for this Edger. Blades that may be suitable for one Edger may become hazardous when used on another Edger.

ELECTRICAL SAFETY

! WARNING: Do not permit fingers to touch the terminals of plug when installing or removing the extension cord from the plug.

1. Double insulated tools are equipped with a polarized plug (one blade is wider than the other and will require the use

of a polarized extension cord. The Edger’s plug will fit into a

polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still

does not fit, obtain a correct polarized extension cord.

A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit ifit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified

electrician to install the proper outlet. Do not change or alter the equipment plug, extension cord receptacle, or extension cord plug in any way.

2.Double insulation eliminates the need for the three-wire grounded power cord and grounded power supply system. Applicable only to Class II (double-insulated) tools. This Edger is a double insulated tool. 5

172.79183 specifications

The Sears 172.79183 is a highly regarded model within the realm of consumer electronics, particularly noted for its versatility and user-friendly design. This device is recognized as an essential tool for various applications, combining traditional functionality with modern technologies to cater to an expanding audience of users.

One of the main features of the Sears 172.79183 is its robust build quality. Designed with durability in mind, it can withstand the rigors of daily use, making it suitable for both personal and professional applications. The ergonomic design adds to user comfort, allowing for extended use without causing strain. This focus on user experience is complemented by a sleek and modern aesthetic that fits seamlessly into any environment.

In terms of technology, the Sears 172.79183 incorporates advanced functionalities that enhance its performance. The device includes intuitive controls, which allow users to easily navigate its various features and settings. Additionally, the inclusion of modern connectivity options, such as Bluetooth and USB ports, allows for effortless integration with other devices and peripherals. This versatility makes it possible for users to expand the device's functionality based on their specific needs.

Another characteristic that sets the Sears 172.79183 apart from competitors is its energy efficiency. Designed to minimize power consumption, it not only represents a cost-effective solution for users but also aligns with environmentally conscious practices. This consideration for sustainability is increasingly important in today’s market, where consumers are looking for products that are both functional and eco-friendly.

Furthermore, the Sears 172.79183 offers an array of accessories and compatible add-ons that allow users to tailor the device to their individual preferences. Whether it be for home entertainment, professional tasks, or leisure activities, this adaptability ensures that the Sears 172.79183 meets a diverse range of user requirements.

In summary, the Sears 172.79183 is a standout model that epitomizes the perfect blend of durability, advanced technology, and user-centric design. Its combination of essential features, modern connectivity options, and energy efficiency makes it a reliable choice for consumers looking for a versatile and effective electronic solution. This model not only addresses current user needs but also anticipates and adapts to future demands, ensuring its relevance in an ever-evolving market.