Carburetor Adjustment, Seasonal Storage

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed

Screw

Air Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or

open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

530163439 specifications

The Weed Eater 530163439 is a powerful and reliable solution for anyone looking to maintain their lawn and garden with ease. This trimmer is designed with a focus on performance and user comfort, making it an indispensable tool for homeowners and landscapers alike.

One of the standout features of the Weed Eater 530163439 is its advanced gas-powered engine. The powerful two-stroke engine delivers ample cutting power, allowing users to tackle even the toughest weeds and overgrown areas. This engine is designed for performance and durability, ensuring that it can handle regular use without compromising on power or efficiency.

In addition to its robust engine, the Weed Eater 530163439 is equipped with a long, flexible shaft that provides excellent reach and maneuverability. This design allows users to easily access hard-to-reach areas, such as beneath bushes or along fences, without straining their backs or arms. The ergonomic handle is another user-friendly feature, providing comfort and control during extended periods of operation.

This trimmer also incorporates a reliable bump feed line advance system, which simplifies the process of feeding new line when needed. With this system, users can easily release more line by tapping the trimmer head on the ground, ensuring continuous cutting without interruption. The dual-line cutting head enhances productivity, allowing for a wider cutting path and more efficient trimming.

Moreover, the Weed Eater 530163439 is built with durability in mind. Its robust construction ensures that it can withstand the rigors of outdoor use, from residential lawns to commercial landscaping projects. Additionally, the lightweight design makes it easy to carry and operate for extended periods without fatigue.

Another technological highlight of the Weed Eater 530163439 is its fuel efficiency. The engine is designed to optimize fuel consumption while maintaining powerful performance, allowing users to work longer without frequent refueling. This efficient operation reduces downtime and increases productivity, making it a smart choice for those serious about lawn care.

In conclusion, the Weed Eater 530163439 combines power, ease of use, and durability to deliver an exceptional lawn care experience. With its advanced engine, flexible shaft, and user-friendly features, this weed trimmer is ideal for anyone looking to keep their outdoor spaces neat and tidy with minimal effort.