Engine, Storing Your Chipper Shredder Vacuum

Belt Guard	Mounting
Spring	Adapter
	Adapter

Idler Idler Bracket

Frame

Transmission Pulley

Figure 17

•Press down on the belt guard spring by the idler pulley, and release the spring from the slot on the idler bracket.

•Place the belt on the idler pulley and place belt guard spring back into the slot on the idler bracket. See Figure 17.

•Place the mounting adapter against the engine and make sure the hole in the mounting adapter is facing up.

•Place the inner housing against the mounting adapter and the frame. Secure with five hex bolts and two hex nuts previously removed. Refer to Figure 16.

•Slide the impeller assembly onto the crankshaft and place a screwdriver under the belt. Turn the impeller assembly counterclockwise to place the belt into the slot on the impeller. Make sure the belt is routed inside all belt guards.

•Secure impeller assembly to crankshaft using hex bolt, lock washer, and flat washer previously removed. Torque bolt between 550-700 in. lb.

•Place the housing blades against the inner housing. Refer to Figure 15.

•Place the outer housing against the inner housing. See Figure 18. Insert two screwdrivers into the holes to hold the blades in place while attaching the outer housing.

•Secure with the 14 self-tapping screws, previously removed. Insert all screws first before tightening.

•Reassemble the flail screen, discharge chute, nozzle and the bag. (For reassembly, follow instructions on previous page in reverse order.)

Outer

Housing

Holes for

Screwdrivers

Figure 18

Engine

A few general recommendations are given below. However, refer to the accompanying engine manual for further details.

•Check engine oil level before each use as instructed in the engine manual. Read and follow instructions carefully.

•Clean air cleaner every 25 hours under normal conditions or once a season. Clean every few hours under extremely dusty conditions. To service the air cleaner, refer to the engine manual.

•The spark plug should be cleaned and the gap reset once a season. Check engine manual for correct plug type and gap specifications.

Storing Your Chipper Shredder Vacuum

•Clean the equipment thoroughly.

•Wipe equipment with an oiled rag to prevent rust.

•Refer to engine manual for correct engine storage instructions

•Store unit in a clean, dry area. Do not store next to corrosive materials such as fertilizer.

WARNING: Never store the machine or fuel container indoors where there is an open flame, spark, or pilot light such as on a water heater, furnace, clothes dryer, or other gas appliance.

CSV206 specifications

The Troy-Bilt CSV206 is a powerful and versatile chipper shredder that excels in both performance and ease of use, making it an ideal choice for homeowners looking to manage yard waste efficiently. With its robust construction and innovative technologies, this machine ensures effective shredding and chipping of garden debris, such as branches, leaves, and twigs.

At the heart of the CSV206 is its reliable 206cc OHV engine, designed to deliver ample power for tackling heavy-duty tasks. The engine features a recoil start for quick and easy ignition, allowing users to jump straight into their yard clean-up without the hassle of complicated starting procedures. Coupled with a 78-pound weight, this chipper shredder strikes a good balance between portability and stability, allowing it to handle challenging terrains while maintaining its sturdiness.

The CSV206 showcases a unique 2-in-1 design, featuring a chipper and a shredder in one machine. Its 1.5-inch max chip capacity is ideal for tackling branches and larger-sized debris, making it perfect for maintaining a clean yard. The integrated shredding system efficiently reduces leaves and smaller materials into mulch, which can then be conveniently composted or used to enhance garden beds.

One noteworthy feature of the CSV206 is its large, versatile hopper. The top-loading design enables users to easily feed materials into the machine, which is complemented by a side discharge chute that directs shredded material precisely where it’s needed. This design reduces the effort and time needed for yard clean-up, making it a preferred choice among gardeners and landscapers.

User-friendly technology is evident in the CSV206's safety features, including a safety lid that ensures the chipper operates only when properly closed. Additionally, its durable steel construction ensures long-lasting performance, and the powder-coated finish helps resist rust and corrosion, extending the lifespan of the machine.

The Troy-Bilt CSV206 is also equipped with oversized wheels that enhance mobility, allowing users to navigate their yard smoothly, even across uneven terrain. With its blend of power, versatility, and user-friendly design, the Troy-Bilt CSV206 stands out as a great investment for anyone needing an efficient solution for yard waste management. Whether tackling seasonal clean-ups or maintaining regular yard maintenance, this chipper shredder promises to simplify the task and deliver impressive results.