Assembling Your Chipper Shredder Vacuum

SECTION 2: ASSEMBLING YOUR CHIPPER SHREDDER VACUUM

Unpacking

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts if included with unit (i.e., operator’s manual, etc.)

•Cut along corners, lay carton down flat, and remove packing material.

•Roll or slide unit out of carton and check carton thoroughly for loose parts.

Loose Parts In Carton

Following is the list of loose parts shipped with your equipment. Compare the parts with the illustration in Figure 1 to identify these items.

1.Nozzle

2.Bag

3.Chipper Chute

4.Tamper Plug

5.Oil (Not Shown)

Bag

Nozzle

Attaching The Nozzle

•Remove three wing nuts from the front of the chipper shredder vacuum.

•Place nozzle in position over the three studs on unit and secure with wing nuts just removed.

See Figure 2.

Wing

Nuts

Wing

Nut

Nozzle

Figure 2

NOTE: The metal tab on the nozzle must depress the safety switch button attached to the front of the chipper shredder vacuum or the engine will not start.

Attaching the Chipper Chute

•Loosen, but do not remove, the two hex bolts, flat washers, and flange nuts which are secured to the support bracket. See Figure 3.

Chipper Chute

Tamper Plug

Figure 1

Before Assembly

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the accompanying engine manual before operating your machine.

NOTE: Reference to right or left side of the equipment is observed from the operating position, unless otherwise stated.

Chipper Chute

Flat

Washers

Support

Bracket

Hex Bolts

Flange

Nuts

Figure 3

•Before starting assembly, disconnect the spark plug wire from the spark plug on the chipper shredder vacuum and ground against the engine.

•Remove the two flange nuts, hex bolts and saddle washers which secure the right side of the upper handle to the right side of the lower handle.

See Figure 4.

CSV206 specifications

The Troy-Bilt CSV206 is a powerful and versatile chipper shredder that excels in both performance and ease of use, making it an ideal choice for homeowners looking to manage yard waste efficiently. With its robust construction and innovative technologies, this machine ensures effective shredding and chipping of garden debris, such as branches, leaves, and twigs.

At the heart of the CSV206 is its reliable 206cc OHV engine, designed to deliver ample power for tackling heavy-duty tasks. The engine features a recoil start for quick and easy ignition, allowing users to jump straight into their yard clean-up without the hassle of complicated starting procedures. Coupled with a 78-pound weight, this chipper shredder strikes a good balance between portability and stability, allowing it to handle challenging terrains while maintaining its sturdiness.

The CSV206 showcases a unique 2-in-1 design, featuring a chipper and a shredder in one machine. Its 1.5-inch max chip capacity is ideal for tackling branches and larger-sized debris, making it perfect for maintaining a clean yard. The integrated shredding system efficiently reduces leaves and smaller materials into mulch, which can then be conveniently composted or used to enhance garden beds.

One noteworthy feature of the CSV206 is its large, versatile hopper. The top-loading design enables users to easily feed materials into the machine, which is complemented by a side discharge chute that directs shredded material precisely where it’s needed. This design reduces the effort and time needed for yard clean-up, making it a preferred choice among gardeners and landscapers.

User-friendly technology is evident in the CSV206's safety features, including a safety lid that ensures the chipper operates only when properly closed. Additionally, its durable steel construction ensures long-lasting performance, and the powder-coated finish helps resist rust and corrosion, extending the lifespan of the machine.

The Troy-Bilt CSV206 is also equipped with oversized wheels that enhance mobility, allowing users to navigate their yard smoothly, even across uneven terrain. With its blend of power, versatility, and user-friendly design, the Troy-Bilt CSV206 stands out as a great investment for anyone needing an efficient solution for yard waste management. Whether tackling seasonal clean-ups or maintaining regular yard maintenance, this chipper shredder promises to simplify the task and deliver impressive results.