Troy-Bilt Bronco manual Operating Symbols, Maybeusedonthetillerandengine, To Avoid Serious Injury

Page 5

Decals

For your safety and the safety of others, vari- ous safety and operational decals are located on your unit (see Figure 1-2).

Keep the decals clean and legible at all times. Contact your local service dealer or the factory for replacements if any decals are damaged or missing.

Refer to the Parts List pages in this Manual for decal locations, descriptions and part num- bers.

	Forward Clutch Bail	Reverse Clutch Control
	Forward Clutch Bail	Operating Instruction
		Operating Instruction
		(Super Bronco & Pro-Line)
	Starting Stabilization
	Message (on engine)
		Warning Messages
		Hot Surfaces Warning

Figure 1-2: Location of safety and operating decals.

Operating Symbols

R

Varioussymbols(shownhere,withworddescriptions)

maybeusedonthetillerandengine.

CHOKE

CHOKE

REVERSE

NOTE:Yourunitmaynothaveallofthesymbols.

ON

OFF

ROTATING TINES

BAILBAIL

ENGAGED DISENGAGED

FAST

SLOW

STOP

TILLER DIRECTION

LEVER DIRECTION

WARNING

TO AVOID SERIOUS INJURY:

•READ THE OWNER’S MANUAL.

•KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.

•KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.

•NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.

•SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN- CLOGGING TINES OR MAKING REPAIRS.

•KEEP BYSTANDERS AWAY FROM MACHINE.

•KEEP AWAY FROM ROTATING PARTS.

•USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.

5

Image 5

Contents 12/19/06 Form no -02357B.fmCustomer Support Table of ContentsFinding Model Number Do not put hands or feet near or under rotating parts Safety Alert SymbolKeep children and pets away Refer to the Maintenance sectionsUse slower engine speeds Check all nuts, bolts, and screws forTo Avoid Serious Injury Operating SymbolsMaybeusedonthetillerandengine Assembly Steps AssemblyIntroduction Inspect UnitUse the handlebar to roll the tiller to a flat area Install Forward Clutch CableWith the Forward Clutch Bail Y, Fig While preventing the cable adjuster from turningCheck all nuts and screws for tightness Check Transmission OIL LevelFreewheel Ature package to identify the controls on your engineTo adjust the handlebars Travel Position Shallow SettingsTo operate the Forward Clutch Bail Stop all tiller motion by releasing the Forward Clutch BailIntroduction BREAK-IN Operation Following steps describe how to start and stop the engineStarting and Stopping Change engine oilOperating the Tiller For forward motion of the wheels and power to the tinesStopping the Engine and Tiller To move the Bronco in reverse for short distancesTilling Tips & Techniques Tilling On Slopes Tilling Tips & Techniques CON’TClearing the Tines Read the following recommendations before tilling on slopesTerrace Gardening Loading and Unloading the TillerTiller Lubrication Transmission Gear OIL ServiceCheck Hardware Check Tire PressureRemoving⁄Installing a Tine Assembly Removing⁄Installing a Single TineBolo Tines Tine InspectionTo Check Forward Belt Tension Checking and AdjustingReplacement Belt Information Engine Cleaning AIR Cleaner Service Engine OIL Service Forward Clutch Bail AdjustmentTo Check Reverse Belt Tension To Check the Engine Oil LevelSpark Arrester Screen Service Spark Plug ServiceOFF-SEASON Storage To Change the Engine OilProblem Possible Cause Correction TroubleshootingPage Models 643 Description GW-1224-3 Front 34 21 18Bronco 634-43203 Page Page TROY-BILT Tiller Lifetime Limited Warranty