Operation, Before Starting, To Stop Engine

TO CONVERT YOUR MOWER FROM A MULCHER TO A SIDE DISCHARGE MOWER

•Lift mulching plug. Slide the two hooks on the side discharge deflector under the hinge pin on the mulching plug assembly. See fig- ure 6. Lower the mulching plug.

Mulching Plug

Side

Chute

Figure 6

OPERATION

BEFORE STARTING

Service the engine with gasoline and oil as instructed in the separate engine manual packed in your mower. Read instructions carefully.

WARNING: Never fill fuel tank in- doors, with engine running or until the engine has been allowed to cool for at least two minutes after run- ning.

TO START ENGINE AND ENGAGE BLADE

•Attach spark plug wire to spark plug. If unit is equipped with a rubber boot over the end of the spark plug wire, make certain the metal loop on the end of the spark plug wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug. See fig- ure 7.

Metal
Loop
on Spark	Rubber Boot
	Rubber Boot

Figure 7

•If your unit is equipped with a primer, prime engine as instructed in the separate engine manual packed with your unit.

•If your unit is equipped with a throttle con- trol, move throttle lever to the FAST position as instructed in the separate engine manual packed with your unit.

Blade Control

Handle

Starter

Handle

Figure 8

•Standing behind the unit, depress the blade control handle and hold it against the upper handle as shown in Figure 8.

•Grasp the recoil starter handle as shown and pull up rapidly. Return it slowly to the rope guide bolt.

•After engine starts, move throttle control to desired speed (if so equipped). The mower is designed to operate at FULL throttle while mowing.

WARNING: THIS CONTROL MECH- ANISM IS A SAFETY DEVICE. NEVER ATTEMPT TO BYPASS ITS OPERATIONS.

NOTE: The blade control handle must be depressed in order to operate the unit. Release the blade control handle to stop the engine and blade.

TO STOP ENGINE

•Release the blade control handle to stop the engine and blade.

WARNING: The blade continues to rotate for a few seconds after the engine is shut off.

•Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while equip- ment is unattended.

USING YOUR MULCHER (Optional)

WARNING: If you strike a foreign ob- ject, stop the engine. Remove wire from spark plug, thoroughly inspect the mower for any damage, and re- pair the damage before restarting and operating the mower. Extensive vibra- tion of the mower during operation is an indication of damage. The unit should be promptly inspected and repaired.

T-106 specifications

The Troy-Bilt T-106 is a remarkable riding lawn mower designed to deliver efficiency, power, and ease of use for homeowners looking to maintain their lawns. This model is part of Troy-Bilt's extensive lineup, which is known for its durability and innovative features that cater to the needs of various users.

One of the standout features of the T-106 is its robust engine. It typically comes equipped with a reliable 420cc engine that provides ample power for tackling even larger lawns. This engine ensures a smooth performance and consistent cutting, allowing users to complete their mowing tasks quickly and efficiently.

The T-106 features a 42-inch cutting deck, which strikes a perfect balance between maneuverability and cutting capacity. This size makes it suitable for properties of various sizes, ensuring that it can easily navigate tight corners and obstacles while covering a substantial area in a single pass. Additionally, the cutting deck's height adjustment lever allows users to customize the cutting height to achieve their desired lawn appearance.

Another key characteristic of the Troy-Bilt T-106 is its easy-to-use transmission system. Equipped with a shift-on-the-go hydrostatic transmission, the mower allows for seamless speed adjustments without the need to stop or disengage the blades. This feature enhances control and improves the overall mowing experience, making it especially beneficial for those unfamiliar with riding mowers.

Comfort is also a priority in the T-106 design. The mower boasts a comfortable high-back seat, which provides excellent back support during extended use. The ergonomic steering wheel design facilitates easy maneuvering, while the placement of controls ensures that everything is within easy reach, making mowing less of a chore.

Troy-Bilt incorporates several technologies into the T-106 to increase its efficiency and longevity. The mower is often designed with a robust frame that can withstand rugged usage, making it a reliable companion for lawn care. The inclusion of an easy-access fuel tank and a maintenance-friendly build means routine upkeep is manageable, allowing users to enjoy more time mowing and less time maintaining their mower.

In summary, the Troy-Bilt T-106 combines performance, comfort, and innovative features to create an exceptional mowing experience. Whether you have a modest lawn or a sprawling yard, this riding mower is designed to meet the diverse needs of homeowners, making it a valuable addition to any lawn care toolkit. With its combination of power, versatility, and ease of use, the T-106 stands out as a great choice for those seeking an efficient and reliable lawn mower.