Troy-Bilt OG-4605 Important Safe Operation Practices, When you see this symbol- heed its warning

Page 3

This unit has been inspected against the manufacturers quality check list. In case of a discrep- ancy, please call us. We will make every effort to ship the part(s) by courier within one working day of your call.

IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not fol- lowed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.

When you see this symbol— heed its warning.

DANGER: This machine was built to be operated according to the rules for safe op- eration in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replace- ment parts.

Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and su- pervised by a parent.

Never allow adults to operate this machine without proper instruction.

To help avoid blade contact or a thrown ob- ject injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop ma- chine if anyone enters the area.

Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, bones, toys and other foreign objects which could be tripped over or picked up and thrown by the blade. Thrown objects can cause serious personal injury.

Plan your mowing pattern to avoid dis- charge of material toward roads, sidewalks, bystanders and the like. Also, avoid dis- charg ing ma te rial against a wall or obstruction which may cause discharged material to ricochet back toward the opera- tor.

Always wear safety glasses or safety gog- gles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery or light weight (e.g. canvas) shoes.

Many injuries occur as a result of the mower being pulled over the foot during a fall caused by slipping or tripping. Do not hold on to the mower if you are falling; release the handle immediately.

Never pull the mower back toward you while you are walking. If you must back the mower away from a wall or obstruction first look down and behind to avoid tripping and then follow these steps:

a)Step back from the mower to fully extend your arms.

b)Be sure you are well balanced with sure footing.

c)Pull the mower back slowly, no more than half way toward you.

d)Repeat these steps as needed.

Do not operate the mower while under the influence of alcohol or drugs.

Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade can amputate hands and feet.

A missing or damaged discharge cover can cause blade contact or thrown object inju- ries.

Do not engage the self-propelled mecha- nism on units so equipped while starting engine.

Never attempt to make a wheel or cutting height adjustment while the engine is run- ning.

The blade control handle is a safety device. Never attempt to bypass its operation. Doing so makes the safety device inopera-

3

Image 3
Contents OG-4605 SET-UP Operation MaintenanceCalling Customer Support Table of ContentsWhen you see this symbol- heed its warning Important Safe Operation PracticesGeneral Operation Children Service Safe Handling of GasolineSlope Operation Do notGeneral Service Place for future reference GaugeTools Required AssemblyUnpacking Removing Unit from CartonAttaching Grass Catcher to Mower Attaching Drive Adjuster BlockAssembly of Grass Catcher Attaching Starter RopeDo not Remove this Guard Final AssemblyControls Converting to Side DischargeOperation Before StartingTo Start Engine and Engage Blade Deck Using Your Mulcher OptionalFor the Best Results When Mulching To Stop EngineAdjusting Drive Clutch AdjustmentslubricationMaintenance Adjusting Cutting HeightEngine Installing the bladeRear Flap Replacement Blade Mounting TorqueBelt Removal and Replacement OFF Season Storage InstructionsCables Trouble Shooting Problem Possible Causes Corrective ActionService dealer Capots de moteur non illustrée 751B699869 avec vis Replacement PARTS/PIÈCES Détachées710-0286 Truss Mach Scr 1/4-20 x Vis taraudée 1/4-20 x 0,625 Model/Modèle Shroud/Capot Hardware/Quincaillerie Page Carter de la logement supérieur Comp. no TWO Year Limited Warranty Page Pas couvre ne garantie Cette ANS Deux DE Limitée GarantieDépannage DE Guide Saison Hors Entreposage Courroie LA DE Remplacement ET DémontageDéflecteur DU Remplacement Lame la de InstallationEntretien LubrificationRéglages BougieCoupe DE Plateau Moteur DU Arrêt AvertissementMoteur DU Marche EN Mise UtilisationCommandes LA SUR Herbe À SAC DU Assemblage DU Corde LA DE Installation’AJUSTEMENT Bloc DU Installation TondeusePAS Comporte NE FIL LE SI Moteur AssemblageDéballage Caoutchouc EN Gaine DEInclinomètre ’ESSENCE DE Manipulation Enfant Mortelles même et graves corporelles Sécurité DE ConsignesMatières DES Bleta VENTE-APRÈS ServiceUNIS-ÉTATS AUX Imprimé